Sun Microsystems 6800/4810/4800/3800 manual Reboot

reboot

Reboots the system controller.

Scope

platform shell

Syntax

reboot [-y-n]

reboot -h

Options/Parameters

-ydoes not prompt for confirmation.

-ndoes not execute this command. Confirmation is requested.

-hdisplays help for this command.

Description

Reboots the system controller. The reboot command will not change any configuration settings. Active domains will continue to run.

The keyswitch may be set to off if the system controller reboots while a keyswitch operations is in progress.

Caution –Rebooting interrupts any current operation. This includes keyswitch operations, rebooting the Solaris operating environment, testing boards, SNMP, and so on.

Chapter 3 System Controller Alphabetical Command Reference 55