Sun Microsystems 6800/4810/4800/3800 manual Showplatform

showplatform

Displays the configuration and information for the platform and domain status.

Scope

platform shell

Syntax

showplatform [-v] [-d domainID] [-p part]

showplatform [-p part]

showplatform -h

Options/Parameters

-hdisplays help for this command.

-ddomainID specifies a domain to show (a, b, c, or d).

-ppart domainID displays information on a specific part. Use the options in this list when you specify a domain with the -doption. These options are the same as the -ppart options to showdomain.

where:

■acls shows the Access Control List (ACL).

■bootparams shows boot parameter information.

■loghosts shows the log hosts for the domain.

■mac shows MAC addresses for the domain.

■snmp shows SNMP configuration for the domain.

■status shows domain status.

-ppart displays information on a specific part. Use the options to -ppart when you do not specify a domain with the -doption.

where:

■acls shows the Access Control List (ACL).

■frame shows FrameManager information.

■log shows log hosts for the platform.

■mac shows the mac addresses, hostID, and the platform a serial number for the domain and the system controllers.

■network displays the network settings.

■partition shows the partition mode.

108 Sun Fire 6800/4810/4800/3800 System Controller Command Reference Manual • October 2001