C H A P T E R 2
System Controller Syntax,
Arguments, and Device Names
This chapter describes the following topics:
■“Command Syntax and Arguments” on page 3
■“Command Names” on page 4
■“Component Names” on page 4
■“Board States for CPU/Memory Boards and I/O Assemblies” on page 6
■“Board Test Status” on page 6
■“Domain Status” on page 7
■“Interactive Commands” on page 8
■“Command Line Editing” on page 9
■“Command Line History” on page 10
■“Command Completion” on page 11
Command Syntax and Arguments
The general syntax of system controller commands is:
command_name [flags][arguments]
3
