EtherHub 1500 System User’s Guide
Parameter
Timeout
Retry
Filename
Transferred Block
Total Blocks
Downloading System Software
Use the Download command from the System Menu to load available software updates into the agent’s flash ROM. The download file should be an EtherHub 1500 *.bin file from Accton Technology Corporation; otherwise the agent will not accept it.
Invoking this command brings up the Download dialog box. When all entries are confirmed, the display will change to show the progress of the download process. After downloading the new software, the agent will automatically restart itself. The following describes each entry in the dialog box:
Description
Time to wait for a response.
Number of attempts to make contact.
The *.bin file to download.
Current number of data block being transferred.
Total number of blocks to transfer.
Restarting the Agent
Use the Restart command from the System menu to reset a selected agent. LEDs on the agent will light up sequentially as it executes the initialization test.
Reverting Configuration to Factory Settings
Use the Factory Settings command from the System menu to change all configuration settings back to the factory defaults.
Setup and Configuration |