Accton Technology 1500 manual Led

Page 92

EtherHub 1500 System User’s Guide

A 16-port intelligent hub with an SNMP-based network management agent. It is a component of Accton’s EtherHub 1500 System.

Ethernet

A network communication system developed and standardized by DEC, Intel, and Xerox, using baseband transmission, CSMA/CD access, logical bus topology, and coaxial cable. The successor IEEE

802.3standard provides for integration into the OSI model and extends the physical layer and media with repeaters and implementations that operate on fiber optics, broadband, and unshielded twisted-pair.

FlexBus 1500 Ports

STP ports found at the backplane of the EtherHub labeled BUS IN and BUS OUT. These ports are used for linking the hub to other compatible hubs using Accton’s FlexBus 1500 STP cable.

Jabber

Refers to an abnormal Ethernet frame transmission. The frames causing jabber are normally much too long. It may come from a malfunctioning Ethernet card and may cause data loss for all network users.

LED

Light emitting diode on the front panel of the EtherHub used for monitoring a hub or network condition. A LED display corresponds to a hub condition.

MIB

An acronym for Management Information Base. It is a set of database objects that contains information about the device. Note that MIB II and Bridge MIB are simply subordinate components of the overall MIB.

Multi-Segment Architecture

2

Glossary

Image 92
Contents EtherHub 1500 System EtherHub 1500 System QWHUQDWLRQDO-HDGTXDUWHUV FCC Warning Sicherheitshinweise About this Guide Package Contents Contents Hardware Installation Setup and ConfigurationApplications Appendix a Product Specifications Appendix C Product Support ServicesAppendix B Pin Assignments Glossary IndexList of Figures Overview EtherHub 1500 SystemOverview Overview Features of EtherHub 1500 System ∙ BNC EH1551, default module preinstalled in EH1500Distinguishing Factors of EtherHub 1500 System EtherHub 1500 System User’s Guide Chapter Hardware Description Front Panel DisplaysSmartWatch LED Panel SmartWatch LED Panel for EtherHub-16i+Color Green Label PWR/CPU Function Power indicator Terminator Snmp EtherHub 1500 System User’s Guide Jabber EtherHub 1500 System User’s Guide Alert Collision EtherHub 1500 System User’s Guide Segment LED Indicators EtherHub 1500 System User’s Guide Hub ID Indicators Partition Link PARTITION/DISABLED Configure Button Daisy-Chain Switch STP Station PortsSocket Switch Rear Panel DisplaysBUS Power Socket Power SwitchChapter Hardware Installation Before You BeginHardware Installation Stacking Hubs without a Rack Stacking Hubs without a RackMounting Hubs Using a Mounting Rack Mounting Hubs on a RackConnecting the Hub System EtherHub 1500 System User’s Guide Preparing for System Configuration Connecting the Hub’s RS232 Serial Port to a PC COM PortEtherHub 1500 Site Running the Out-of-Band Configuration Program Installing an Snmp Backup Agent EtherHub 1500 System User’s Guide Diagnostic Tests Chapter Setup and ConfigurationSystem Setup Multi-Segment Architecture FlexBus 1500 Management Link Hub ID SettingSnmp Backup Agent Port Backup Function Preparing for Configuration Management Hot Remove FunctionFrom a local console ∙ Terminal Channel for local hookup Menu Trap Managers Download Restart Factory Settings System MenuChanging System Configuration Downloading System Software Hub Port Backup Port Push Button Control MenuConfiguring Port Parameters Performance Menu Threshold MenuTo set thresholds Using the Configure Button To summarize Active LEDs Segment LEDs Attach the hub to one segment Master Agent Setting EtherHub-16mi+only Diagnostic function Applications Attaching Stack to One SegmentAttaching Stack to Three Segments Attaching Hubs in Stack to 3 SegmentsAttaching Stack to Multiple Segments Linking Part of the Stacked Hubs to a SegmentEach Hub is Isolated Stacked Hubs Not Linked to a SegmentExtending the Network with STP/BNC Connections Linking a Stack to a Network Management Station Linking Stacked Hubs to a Network Management StationInterconnecting Segments Linking Segments in a Stacked SystemLinking a Distributed Segment Linking a Distributed SegmentLinking Distributed Segments Distributed Multi-Segment EnvironmentPhysical Characteristics Appendix a Product SpecificationsFeatures Specifications for FlexBus 1500 Cable PVCAttenuation for Horzontal FlexBus 1500 Cable Next for Horizontal FlexBus 1500 CableStandards Compliance USARS232 Port Pin Description Appendix B Pin AssignmentsFlexBus 1500 Pin Description DB9 Serial Port to RJ-45 Converter Connector Pin Assignment DB25 RS232 to RJ-45 Converter Connector Pin Assignment DCE Port Appendix C Product Support Services Problem ReportHardware Repair Service Product RegistrationSoftware Update and Upgrade Service Bulletin Board Service BBSInteractive Fast Fax U.S.A. office Technical SupportLimited Warranty Customer Remedies Return Process North and South AmericaOrdering Information Glossary 10BASE-TLED Out-of-Band Index Index Index Troubleshooting EH1501s EH1502s E0895-R01