ADTRAN ADT-1234POE manual Option Modules

NetVanta 1000/1000R Series Hardware Installation Guide Option Modules

4.OPTION MODULES

The NetVanta 1224STR, 1224R, and 1335 support several option modules designed to meet a variety of networking requirements. The option modules include plug-in NIMs and plug-on DIMs.

NIMs are cards that plug directly into the option module slot located on the rear of the base unit. These cards provide the following types of interfaces:

•NetVanta 56K/64K NIM (P/N 1200861L1) on page 36

•NetVanta T1/FT1 NIM (P/N 1202862L1) on page 37

•NetVanta T1/FT1 NEBS NIM (P/N 1200862L2#NEBS) on page 38

•NetVanta T1/FT1 + DSX-1 NIM (P/N 1202863L1) on page 39

•NetVanta Dual T1 NIM (P/N 1200872L1) on page 40

•NetVanta E1/FE1 NIM (P/N 1200868E1/L1) on page 41

•NetVanta E1/FE1 + G.703 Drop NIM (P/N 1200878E1/L1) on page 42

•NetVanta Serial NIM (P/N 1200866E1) on page 43

•NetVanta SHDSL NIM, Annex A (P/N 1200936E1) on page 44

•NetVanta SHDSL NIM, Annex B (P/N 1200937E1) on page 45

•NetVanta ADSL NIM, Annex A (P/N 1202869E1) on page 46

•NetVanta ADSL NIM, Annex B (P/N 1202889E1) on page 47

•NetVanta 3G CDMA NIM (P/N 1700801G1) on page 48

DIMs are plug-oncards that plug directly on to the NIM prior to installation into the base unit. A DIM must be plugged on to a NIM in order for the interfaces on the NIM to be active. The NetVanta supports the following DIMs:

•NetVanta Analog Modem DIM (P/N 1200864L1) on page 50

•NetVanta ISDN BRI DIM (P/N 1200865L1) on page 51

•NetVanta ISDN S/T DIM (P/N 1200875L1) on page 52

This section describes each module, providing individual card specifications and features. Refer to Connector Pin Definitions on page 67 for pinout information. Installing Dial Backup and Network Interface Modules on page 57 provides information on card installation.

61200500L1-34N Copyright © 2008 ADTRAN, Inc. 35