Unit Installation | NetVanta 1000/1000R Series Hardware Installation Guide |
|
|
Installing Wireless Access Antennas (NetVanta 1335 WiFi and NetVanta 1335 WiFi PoE only)
The NetVanta 1335 WiFi Series units are shipped with two
Instructions for Installing Antennas
Step | Action |
1Place either of the two antennas directly onto the antenna port labeled ANT 1 on the rear panel. See Figure 20 on page 29 for port locations.
2Twist the antenna onto the threads until it is secure.
3Repeat Step 2 with the second antenna, attaching it to the ANT 2 port.
Installing the 3G CDMA NIM Antennas
The optional 3G CDMA NIM is installed into the rear panel of the base unit following the instructions on page 57. The 3G NIM ships with two detachable
ANT1ANT2
WWAN RSSI
1xRTT EVDO
3G NIM (CDMA)
SMA Antenna
Connectors
Figure 42. 3G CDMA NIM Rear Panel
Notification for Devices with Detachable Antennas
The 3G CDMA NIM has been designed to operate in the 800/1900 frequency CDMA bands with the
To reduce potential radio interference to other users, the antenna type and its gain should be chosen so that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
62 | Copyright © 2008 ADTRAN, Inc. |