ADTRAN ADT-1234POE manual Antenna Installation Instructions

Page 65

NetVanta 1000/1000R Series Hardware Installation Guide	Unit Installation

Antenna Installation Instructions

	Instructions for Installing the 3G NIM Antennas
Step	Action

1Remove power from the base unit.

2Place either of the two antennas directly onto the antenna port labeled ANT1 on the rear panel.

3Using the thumb screws only, carefully thread the antenna onto the connector until it is secure.

4Repeat Step 2 with the second antenna, attaching it to the ANT2 (diversity) port.

5Once both antennas are secured, the antennas can be flexed at the joint to increase reception.

6Position antennas in a “V” shape at a 90 degree angle to each other, as shown in Figure 43.

90

ANT1ANT2

WWAN RSSI

1xRTT EVDO

3G NIM (CDMA)

Figure 43. Proper Antenna Alignment

Your NetVanta is now ready to be configured and connected to the network. For more information on configuration for a specific application, refer to the quick configuration documents provided on the AOS Documentation CD. For details on the CLI, refer to the AOS Command Reference Guide (also included on your CD).

61200500L1-34N

Copyright © 2008 ADTRAN, Inc.

65

Image 65

Contents NetVanta 1000 Series Software Licensing Agreement TrademarksTo the Holder of the Manual Conventions Save These Important Safety Instructions Safety InstructionsREN/SOC FIC Usoc FCC-Required InformationElectromagnetic Compatibility EMC Table FCC Radio Frequency Interference StatementWireless Radio Channel Ranges Service and Warranty Table of Contents Copyright 2008 ADTRAN, Inc List of Figures Copyright 2008 ADTRAN, Inc List of Tables Copyright 2008 ADTRAN, Inc SFP Module Slots Power over EthernetWireless Access NetVanta 1224 Front Panel Design NetVanta 1224 Shipping ContentsNetVanta Status LED Power ConnectionNetVanta 1224 Rear Panel Design NetVanta 1224ST Front Panel Design NetVanta 1224ST Shipping ContentsNetVanta 1224ST Gigabit Ethernet Interfaces/SFP Slots NetVanta 1224ST Rear Panel DesignNetVanta 1224ST Rear Panel Interfaces Console Interface NetVanta 1224RNetVanta 1224R Front Panel Design NetVanta 1224R Shipping ContentsStatus LEDs NetVanta 1224R Rear Panel DesignNetVanta 1224STR NetVanta 1224STR Shipping ContentsNetVanta 1224STR Front Panel Design NetVanta 1224STR AC Front Panel Layout NetVanta 1224STR Rear Panel DesignNetVanta NetVanta 1335 Front Panel Design NetVanta 1335 Shipping ContentsGigabit Ethernet Interfaces/SFP Slots NetVanta 1335 Front Panel Layout NetVanta 1335 Rear Panel DesignNetVanta 1524ST Antenna ConnectorsNetVanta 1335 Rear Panel Interfaces NIM Option Slot CompactFlashNetVanta 1524ST Front Panel Design NetVanta 1524ST Shipping ContentsCSMA/CD NetVanta 1524ST Rear Panel DesignFront Panel LED Descriptions Power over EthernetProduct Specifications Option Modules NetVanta 56K/64K NIM P/N 1200861L1 Network Interface ModulesT1/FT1 Interface NetVanta T1/FT1 NIM P/N 1202862L1NetVanta T1/FT1 Nebs NIM NetVanta T1/FT1 Nebs NIM P/N 1200862L2#NEBSDSX-1 Interface NetVanta T1/FT1 + DSX-1 NIM P/N 1202863L1T1 Interface NetVanta Dual T1 NIM P/N 1200872L1WAN-E1 Interface NetVanta E1/FE1 NIM P/N 1200868E1/L1Interface NetVanta E1/FE1 + G.703 Drop NIM P/N 1200878E1/L1Serial Interface Operating ModeNetVanta Serial NIM P/N 1200866E1 Shdsl Interface NetVanta Shdsl NIM, Annex a P/N 1200936E1NetVanta Shdsl NIM, Annex B NetVanta Shdsl NIM, Annex B P/N 1200937E1Adsl Interface NetVanta Adsl NIM, Annex a P/N 1202869E1NetVanta Adsl NIM, Annex B NetVanta Adsl NIM, Annex B P/N 1202889E1Frequency Bands Wireless TechnologiesNetVanta 3G Cdma NIM P/N 1700801G1 1xRTT Cdma NIM LED Descriptions LED Label LED Color IndicationNetVanta Analog Modem DIM P/N 1200864L1 Dial Backup Interface ModulesFeatures NetVanta Isdn BRI DIM P/N 1200865L1 Etsi TBR NetVanta Isdn S/T DIM P/N 1200875L1Tools Required Unit InstallationInstructions for Rack Mounting the NetVanta Step Action Mounting OptionsRack Mounting the NetVanta Step Action Wall Mounting the NetVantaInstructions for Wall Mounting the NetVanta NetVanta 1224STR DC Supplying Power to the UnitNetVanta 1000 and 1000R Series AC-Powered Units Grounding the NetVanta 1224STR DC Installing Dial Backup and Network Interface ModulesInstalling DIMs Instructions for Installing the DIMs Step ActionNIM and DIM Installation Instructions for Installing the NIMs Step ActionNetVanta VPN Accelerator Card Installation Instructions for Installing a CompactFlash Card Step Action Installing a CompactFlash Card NetVanta 1335 Series onlyNotification for Devices with Detachable Antennas Installing the 3G Cdma NIM AntennasInstructions for Installing Antennas Step Action Maximum Unit Diversity Antenna Specifications DescriptionDescription Additional Warnings Antenna ExtensionsInstructions for Installing the 3G NIM Antennas Antenna Installation InstructionsCopyright 2008 ADTRAN, Inc Pin Name Table A-1. Console Port Pinouts Name DescriptionTable A-2. SFP Slot Pinouts Table A-4 Base-T Gigabit Ethernet Port Pinouts Table A-3 /100Base-T Ethernet Port PinoutsPin Name Description Table A-7. WAN-E1 Connector Pinouts Table A-5. WAN-DDS Connector Pinouts Name DescriptionTable A-6. WAN-T1 Connector Pinouts Table A-10. WAN-SHDSL Connector Pinouts Table A-8. DSX-1 Connector Pinouts Name DescriptionTable A-9. G.703 Connector Pinouts Name Description Table A-12. Serial to Cable Connector Pinouts EIA Table A-11. WAN-ADSL Connector PinoutsPin Table A-15. Isdn S/T DBU Connector Pinouts Dial Backup Interface Module Pinouts DBU ConnectorCopyright 2008 ADTRAN, Inc Numerics IndexIndex NetVanta 1000/1000R Series Hardware Installation Guide