Unit Installation | NetVanta 1000/1000R Series Hardware Installation Guide |
|
|
Installing the NetVanta VPN Accelerator Card (included in P/N 4200368L1)
The optional VPN Accelerator card plugs into a
NetVanta 1224STR to provide encryption/decryption and security acceleration services. The card provides the following security services to the host processor: DES,
The AOS Enhanced Feature Pack software is required to take advantage of the VPN acceleration features of this card.
The NetVanta VPN accelerator card is intended to be serviced/installed by qualified service personnel only.
| Instructions for Installing the NetVanta VPN Accelerator Card |
|
|
Step | Action |
1Remove power from the unit.
2Remove the nine screws and, if necessary, two mounting brackets (see Figure 40).
3Using a
4Carefully lift and remove the unit’s cover to expose the circuit board.
5Gently slide the accelerator card into the PCI slot as shown. The card is keyed to fit into the slot only one way. To avoid damaging the card pins, do not use excessive force.
6Replace the unit cover, screws, and mounting brackets.
7Restore power to the unit.
Figure 40. NetVanta VPN Accelerator Card Installation
60 | Copyright © 2008 ADTRAN, Inc. |