ADTRAN ADT-1234POE manual NetVanta Shdsl NIM, Annex a P/N 1200936E1, Shdsl Interface

Option Modules NetVanta 1000/1000R Series Hardware Installation Guide

NetVanta SHDSL NIM, Annex A (P/N 1200936E1)

The NetVanta SHDSL NIM, Annex A (shown in Figure 31) provides a WAN SHDSL interface for the NetVanta. See Table A-10on page 70 for the SHDSL connector pinouts.

WAN-SHDSL

ANNEX A

Figure 31. NetVanta SHDSL NIM, Annex A

Features and Specifications

Operating Mode

•Line termination (CO)

•Network termination (CPE)

SHDSL Interface

•Supported Standards: ITU-T G.991.2 SHDSL, Annex A

M-pair bonding of 2 pairs - ITU.T G.991.2

•Line Rate (2-wire mode): 192 to 2304 kbps in 64k increments

•Line Rate (4-wire mode): 384 to 4608 kbps in 128k increments

•Payload: ATM (AAL5)

•Line Code: TC-PAM

•Connector: RJ-45

Clock Source

•CPE Operating Mode: Network

•CO Operating Mode: Internal

Diagnostics

•Network loopbacks (local and remote)

•Alarm generation and detection

•Programmable alarm threshold setting for loop attenuation and signal-to-noise ratio

Compliance

•EMC - see Electromagnetic Compatibility (EMC) Table on page 6.

•ACTA/FCC Part 68

•UL/CUL 60950

•RoHS compliant (Telecommunications exemption)

Environmental

•Operating Temperature: 0°C to 50°C

•Storage Temperature: -20°C to 70°C

•Relative Humidity: Up to 95 percent, noncondensing

Physical

•Dimensions: 2.75-inch W x 4.25-inch D

44 Copyright © 2008 ADTRAN, Inc. 61200500L1-34N