ADTRAN ADT-1234POE manual Unit Installation, Tools Required

NetVanta 1000/1000R Series Hardware Installation Guide Unit Installation

5.UNIT INSTALLATION

The instructions and guidelines provided in this section cover hardware installation topics, such as mounting options, supplying power to the unit, and installing option cards. These instructions are presented as follows:

•Mounting Options on page 54

•Supplying Power to the Unit on page 56

•Installing Dial Backup and Network Interface Modules on page 57

•Installing the NetVanta VPN Accelerator Card (included in P/N 4200368L1) on page 60

For information on configuring a specific application, refer to the quick configuration documents provided on the AOS Documentation CD, or the AOS Command Reference Guide (also included on your CD).

To prevent electrical shock, do not install equipment in a wet location or during a lightning storm.

Electronic modules can be damaged by static electrical discharge. Before handling modules, put on an antistatic discharge wrist strap to prevent damage to electrical components. Place modules in antistatic packing material when transporting or storing. When working on modules, always place them on an approved antistatic mat that is electrically grounded.

Tools Required

The customer-provided tools required for the hardware installation of the NetVanta are:

•Ethernet cables

•Network cables (module dependent)

•DSX-1 cable (T1/FT1 + DSX-1 module only)

•DBU cable (dial backup functions require an optional DIM)

•Phillips-head screwdriver (rack-mounted applications only)

To access the CLI of the NetVanta, you will also need a VT100 terminal or PC with terminal emulation software and a console port cable. Instructions on how to access the CLI are given in the AOS Command Reference Guide (provided on the AOS Documentation CD).

61200500L1-34N Copyright © 2008 ADTRAN, Inc. 53