ADTRAN ADT-1234POE manual NetVanta E1/FE1 NIM P/N 1200868E1/L1, WAN-E1 Interface

NetVanta 1000/1000R Series Hardware Installation Guide Option Modules

NetVanta E1/FE1 NIM (P/N 1200868E1/L1)

The NetVanta E1/FE1 module (see Figure 28) provides a WAN-E1 interface for the NetVanta meeting the requirements of ITU-T G.703/G.704. The module provides a single 2.048 Mbps network interface. See

Table A-7on page 69 for the pinouts. See page 73 for the DBU connector pinouts. An optional DIM is required for dial backup applications.

WAN-E1DBU

Figure 28. NetVanta E1/FE1 NIM

Features and Specifications

Operating Modes

•Frame Relay, Multilink Frame Relay

•PPP, Multilink PPP

•HDLC

WAN-E1 Interface

•Supported Standards: ITU G.703, ITU-T G.704 (CRC-4), ITU-T G.823, ITU-T G.797

•Line Rate: 2.048 Mbps +50 PPM

•Line Code: AMI or HDB3

•Framing: FAS with optional CRC-4

•FE1 Line Rate: Channelized timeslot (in multiples of 64 kbps)

•Receiver Sensitivity: -30 dB

•Connector: RJ-48C

Clock Source

•Network

•Internal

Diagnostics

•Test Pattern Generation and Detection: QRSS, 511, all ones, all zeros

•Network loopbacks

•Network performance data (15 minutes and 24 hours)

•Alarm generation and detection

Compliance

•EMC - see Electromagnetic Compatibility (EMC) Table on page 6.

•AS/ACIF S016

•ETSI TBR 12/TBR 13

•EN 60950

•IEC 60950

•AS/NZS 60950

•RoHS Compliant (Telecommunications exemption)

Environmental

•Operating Temperature: 0°C to 50°C

•Storage Temperature: -20°C to 70°C

•Relative Humidity: Up to 95 percent, noncondensing

Physical

•Dimensions: 2.75-inch W x 4.25-inch D

61200500L1-34N Copyright © 2008 ADTRAN, Inc. 41