Adder Technology ADD0026/6, MX11800, SV4, SV2 manual SmartView Installation and Use

Page 13

T1 - 2 seconds autoscan delay time before switching to next port (default) T2 - 5 seconds autoscan delay time before switching to next port

T3 - 7 seconds autoscan delay time before switching to next port

T4 - 10 seconds autoscan delay time before switching to next port T5 - 15 seconds autoscan delay time before switching to next port T6 - 20 seconds autoscan delay time before switching to next port T7 - 30 seconds autoscan delay time before switching to next port T8 - 60 seconds autoscan delay time before switching to next port

U1 - SmartView channels are switchable using a 3 button mouse

or IntelliMouse (default) (SmartView reports 2 button mouse mode to PCs) U2 - SmartView channels are not switchable using 3 button mouse

or IntelliMouse (SmartView reports 2 button mouse mode to PCs) U3 - SmartView channels are not switchable using 3 button mouse

or IntelliMouse (SmartView reports 3 button mouse mode to PCs) U4 - SmartView channels are switchable using 3 button mouse

or IntelliMouse (SmartView reports IntelliMouse mode to PCs) U5 - SmartView channels are not switchable using 3 button mouse or IntelliMouse (SmartView reports IntelliMouse mode to PCs)

U7 – Cycle between all ports when switching with ‘Hotkeys + Tab’ or three button mouse

U8 – Cycle between active ports only when switching with ‘Hokeys + Tab’ or three button mouse (default)

H1 - Hotkey combination is CTRL + ALT + command key (default)

H2 - Hotkey combination is CTRL + SHIFT + command key H3 - Hotkey combination is ALT + SHIFT + command key H4 - Hotkey combination is RIGHT ALT + command key

H5 - Hotkey combination is LEFT ALT + RIGHT ALT + command key

H6 - Hotkey combination is LEFT CTRL + LEFT ALT + command key

H7 - Hotkey combination is RIGHT CTRL + RIGHT ALT + command key H8 - No hotkey combination enabled

F1 - Display firmware first digit

F2 - Display firmware second digit

F3 - Display firmware third digit

F5 - Restore PS/2 mouse function

F6 - Restore IntelliMouse function

F8 - RESET all configurations to default settings. (Display confirms with 'r').

SmartView

Installation and Use

Page 12

Image 13
Contents SMARTView Warranty Safety informationAbout this manual European EMC directive 89/336/EEC Radio Frequency EnergyContents Appendices SmartView configuration optionsIntroduction Key featuresProduct information Package contentsSmartView SV2 version supporting 2 PCs What you will need InstallationMounting the SmartView Connecting your devicesConfiguring the SmartView Configuring your PCsH2e Ee Summary of SmartView configuration optionsSmartView Installation and Use Re-enabling a disconnected PS/2 mouse Other useful installation informationSmartView Installation and Use SmartView Installation and Use Power on status Using the SmartViewFront panel key and remote controller Status displayKeyboard hotkey control SmartView Installation and Use RS232 control Mouse controlCascading SmartViews SmartView Installation and Use Screen saver time delay SmartView configuration optionsDisplay options Autoscan lock on mode and delay time Mouse mode and mouse switching of channels Keyboard hotkey combination Setting a security password Firmware functions version query, mouse restore and resetCascade query code Exit configure modeCycling between all channels or just the active channels A1. Keyboard, monitor and mouse to SmartView Appendix A. Cable and connector specificationsA2. SmartView to PCs 1 to A3. Expansion port pin assignments SmartView 4 port only Appendix B. Problem Solving Mouse causes channel to change SmartView Installation and Use SmartView Installation and Use SMARTView
Related manuals
Manual 34 pages 40.83 Kb