Adder Technology ADD0026/6, MX11800, SV4, SV2 manual Keyboard hotkey combination

Page 25

U1 - SmartView channels are switchable using a 3 button mouse or IntelliMouse (default)

(SmartView reports 2 button mouse mode to PCs)

U2 - SmartView channels are not switchable using 3 button mouse or IntelliMouse

(SmartView reports 2 button mouse mode to PCs)

U3 - SmartView channels are not switchable using 3 button mouse or IntelliMouse

(SmartView reports 3 button mouse mode to PCs)

U4 - SmartView channels are switchable using 3 button mouse or IntelliMouse

(SmartView reports IntelliMouse mode to PCs)

U5 - SmartView channels are not switchable using 3 button mouse or IntelliMouse

(SmartView reports IntelliMouse mode to PCs)

4.5 Keyboard hotkey combination

The keyboard hotkey combination is used to change a channel, set autoscan mode or secure the product (so that the password needs to be typed before it can be used again). The following keyboard hotkey combinations can be selected. These hotkey combinations are used together with the command keys to trigger the required SmartView function. The left and right shift key combination is particularly suitable for extended keyboards where additional keys can be programmed to act as a combination of other keys. Such keyboards are supplied with many Gateway 2000 computers. Programming spare keys to trigger the hotkey combination allows channels to be selected via a single key stroke.

H1 - ‘CTRL’ and ‘ALT’ keys together (left or right hand keys operate) (default) H2 - ‘CTRL’ and ‘SHIFT’ keys together (left or right hand keys operate)

H3 - ‘ALT’ and ‘SHIFT’ keys together (left or right hand keys operate)

H4 - ‘RIGHT ALT’ key

H5 - ‘LEFT ALT’ and ‘RIGHT ALT’ keys together

H6 - ‘LEFT CTRL’ and ‘LEFT ALT’ keys together

H7 - ‘RIGHT CTRL’ and ‘RIGHT ALT’ keys together

H8 - No hotkey enabled

SmartView

Installation and Use

Page 24

Image 25
Contents SMARTView Warranty Safety informationAbout this manual European EMC directive 89/336/EEC Radio Frequency EnergyContents Appendices SmartView configuration optionsIntroduction Key featuresProduct information Package contentsSmartView SV2 version supporting 2 PCs What you will need InstallationMounting the SmartView Connecting your devicesConfiguring the SmartView Configuring your PCsH2e Ee Summary of SmartView configuration optionsSmartView Installation and Use Re-enabling a disconnected PS/2 mouse Other useful installation informationSmartView Installation and Use SmartView Installation and Use Power on status Using the SmartViewFront panel key and remote controller Status displayKeyboard hotkey control SmartView Installation and Use RS232 control Mouse controlCascading SmartViews SmartView Installation and Use Screen saver time delay SmartView configuration optionsDisplay options Autoscan lock on mode and delay time Mouse mode and mouse switching of channels Keyboard hotkey combination Setting a security password Firmware functions version query, mouse restore and resetCascade query code Exit configure modeCycling between all channels or just the active channels A1. Keyboard, monitor and mouse to SmartView Appendix A. Cable and connector specificationsA2. SmartView to PCs 1 to A3. Expansion port pin assignments SmartView 4 port only Appendix B. Problem Solving Mouse causes channel to change SmartView Installation and Use SmartView Installation and Use SMARTView
Related manuals
Manual 34 pages 40.83 Kb