Adder Technology SV4, MX11800, ADD0026/6, SV2 manual Introduction, Key features

Page 6

1. Introduction

Thank you for purchasing the Adder SmartView. Your SmartView is a high performance keyboard, monitor and mouse sharing device which supports a wide range of PC hardware and software platforms.

1.1 Key features

Control multiple PCs from a single keyboard, monitor and mouse.

SmartBoot feature automatically boots all machines during power up.

Mixed AT/PS2 keyboards and PS2/RS232 mice supported as standard.

Can be cascaded without limitation to provide a video switching network.

OVQ circuit ensures Optimum Video Quality even over extended distances.

Password security prevents unauthorised use.

Support for Microsoft IntelliMouse and other common wheel mice.

Remote control module for convenient operation (SV4 models).

Channel switching by front panel key, keyboard hotkey or 3 button/wheel mouse.

Automatically restores keyboard and mouse states when channel changed.

SV4 model can be controlled remotely via an RS232 serial port.

Supports high bandwidth monitors at resolutions up to 1600 x 1280 at 100Hz.

Mouse restoration functions to enable ‘hot plugging’ of certain systems.

Supports keyboard modes 1,2 and 3 and mouse prompt and stream modes for maximum compatibility.

SmartView

Installation and Use

Page 5

Image 6
Contents SMARTView Safety information WarrantyAbout this manual Radio Frequency Energy European EMC directive 89/336/EECContents SmartView configuration options AppendicesKey features IntroductionPackage contents Product informationSmartView SV2 version supporting 2 PCs Installation What you will needConnecting your devices Mounting the SmartViewConfiguring your PCs Configuring the SmartViewSummary of SmartView configuration options H2e EeSmartView Installation and Use Other useful installation information Re-enabling a disconnected PS/2 mouseSmartView Installation and Use SmartView Installation and Use Front panel key and remote controller Using the SmartViewPower on status Status displayKeyboard hotkey control SmartView Installation and Use Mouse control RS232 controlCascading SmartViews SmartView Installation and Use SmartView configuration options Screen saver time delayDisplay options Autoscan lock on mode and delay time Mouse mode and mouse switching of channels Keyboard hotkey combination Firmware functions version query, mouse restore and reset Setting a security passwordExit configure mode Cascade query codeCycling between all channels or just the active channels Appendix A. Cable and connector specifications A1. Keyboard, monitor and mouse to SmartViewA2. SmartView to PCs 1 to A3. Expansion port pin assignments SmartView 4 port only Appendix B. Problem Solving Mouse causes channel to change SmartView Installation and Use SmartView Installation and Use SMARTView
Related manuals
Manual 34 pages 40.83 Kb