ADIC Scalar Series Configuration Menu, Buzzer Configuration, MENU key, Equipment Description

❐To access the Off-Line Mode menu, press the MENU key. The display will appear as follows:

❐Use the UP or DOWN keys to scroll through the menu choices. Press ENTER to select the item displayed on the top line. Use the RIGHT or LEFT keys to scroll through fields on the same line.

❐To exit the Off-Line Mode menu and return to the On-Line Mode from anywhere in the menu, press the

MENU key.

❐Press ENTER to select the Configuration Menu.

Configuration Menu

The Configuration Menu allows you to select the following operating parameters:

●	Buzzer Configuration	● Set SCSI ID of the Library Robotics
●	Product Sign-On	●	Off-Line Time
●	Initialize Map Slots	●	Initialize Scan Barcodes

●Barcode Scanner

Buzzer Configuration

Enables/disables the sounding of an alarm when an error message or warning alarm is displayed. Enables/disables the beep sound when you press a keypad key.

When you select the Buzzer Configuration option a display similar to the following appears.

❐To enable the error alarm use the LEFT key to select the ErrAlarm field. Use UP or DOWN to select "Y" to enable alarm or "N" to disable alarm. When the error alarm is enabled, a continuous alarm tone will sound in the event of an error message. The alarm will sound until the condition that caused the error has been removed or any key is pressed. To clear an error message from the display, press ALT and ENTER.

❐If you wish to change the status of the keyboard beep, use the RIGHT key to select the Kybd field. Use UP or DOWN to select "Y" to enable a beep when you press a key or "N" to disable the beep.

Note

Buzzer Configuration default: Err Alarm: N, Kybd: Y

❐Press ENTER to make the changes effective or press ESC to return to previous menu item.

Equipment Description 25