PC Concepts ADSL2+ user manual

Page 69

virtual circuit (VC) properties of the ATM VC interface identify a unique path that your ADSL/Ethernet router uses to communicate via the ATM-based network with the telephone company central office equipment.

zThe higher-level protocol interface(s) operate "on top" of the ATM VC interface. The higher-level interface handles the protocols needed to log onto and exchange data with the ISP's access server. ISPs can use several different protocols, including the Point-to-Point Protocol (PPP), Ethernet-over-ATM (EoA) protocol, or the Internet Protocol-over-ATM (IPoA). Be sure to create the specific type of WAN interface your ISP requires.

Interface: The name of the lower-level interface on which this VC operates. The low-level interface names are preconfigured in the software and identify the type of traffic that can be supported, such as data or voice. Internet data services typically use an AAL5-type interface. Vpi, Vci, and Mux Type: These settings identify a unique ATM data path for communication between your ADSL/Ethernet router and your ISP.

Max Proto per AAL5: If you are using an AAL5-type of interface, this setting indicates the number of higher level interfaces that the VC can support (the higher level interfaces can be PPP, EoA, or IPoA interfaces). Contact your ISP to determine which connection protocol(s) they require.

68

Image 69
Contents ADSL2+ Copyright Contents Admin Backup/Restore Configuration 100102 Package Contents System RequirementsAdsl Compliant PPP Support ATM Protocols and EncapsulationsBridging/Routing Support IP ManagementInterface Device managementSingle-Port Adsl Router Front Panel Indicators and DescriptionDescriptions of LED status Four-Port Adsl RouterDescriptions of All Connectors Back PanelConnect Related Devices Page Setup Adsl router via USB Cable Setup Adsl router via Ethernet CablePage Page Page For Windows XP TCP/IP ConfigurationDouble-ClickNetwork Connections icon Page Page For Windows Select Internet Protocol TCP/IP then click Properties Page Page Select Gateway tab and click OK Option2 Configure IP Manually Page Setup Adsl Router via USB Cable on MAC Page Page Page Page Page Compiling the Driver Setup Adsl Router via USB Cable on LinuxLAN Configuration LoginHome HomePage System Mode Quick Configuration Page LAN LAN ConfigurationPage Dhcp Mode Adding Dhcp Server Address Pools Dhcp ServerDhcp Relay Follow these instructions to configure Dhcp relay Page 1 DSL WANATM VC 3 PPP PPP Configuration table displays the following fields 4 EDA Page Ipoa Bridging BridgingConfiguration Enabling Bridging ServicesWAN to WAN Bridging Enable/Disable Enabling Bridgeable InterfacesPage 3 DSL Page Page ATM VC Page RFC 1483 Interface EoA IP Route RoutingPage IP Address Table Page 4 DSL ATM VC Page 6 PPP Page 7 EOA Ipoa Page 1 NAT ServicesRIP 2 RIPPage Select a Send Mode and a Receive Mode Select a metric value for the interfaceFirewall Page IP Filter Page Bridge Filter 6 DNS Blocked Protocols Page Ddns Sntp UPnPUser Configuration AdminCommit & Reboot Committing Changes Local Image UpgradePage Remote Image Upgrade Alarm Image Upgrade SuccessfulDiagnostics Click Submit System Log Port SettingsBackup/Restore Configuration Page Management Control Configuring the ATM Virtual Circuit Autodetect Modes Configuring AutodetectAutodetect Snmp Configuration Click Add Comm Creating CommunitiesViewing Hosts Viewing Global Snmp StatisticsParental Control 103