Step 16: DSL Router Webpage will show as below:
4.5 Setup ADSL Router via USB Cable on Linux
This driver supports
Compiling the Driver
To compile the driver simply run make in "viking" directory. This will create binary driver with name VKGEther.
%make
Loading the module
To load the VKGEther module enter the following command as root in directory "viking" Syntax:
%insmod ./VKGEther {Module Options} Unloading the module
To unload an unused module:
%rmmod VKGEther
You will need to exit or disconnect any program currently using the module before it unload. If the module was configured for LAN, shutdown the ethernet interface:
% ifconfig eth1 down
The ethernet interface associated with the VKGEther driver was "eth1" that's why
32