PC Concepts ADSL2+ user manual

Follow this procedure if you have obtained an updated image from your ISP and stored the file on your PC, CD-ROM, or other media.

1.Insert the media containing the file in your PC's CD-ROM/disk drive. You can access the file from there or copy it to your hard drive or to any shared network drive.

The name of the upgrade file must be either TEImage*.bin or TEPatch*.bin, where * represents any number of characters.

2.If the Local Image Upgrade page is not already displaying, click the Admin tab, then click Local Image Upgrade in the task bar.

3.In the Upgrade File text box, type the path and file name of the file as provided by your ISP. You can click Browse... to search for it on your hard drive or network file system.

The name of the upgrade file must be either TEImage*.bin or TEPatch*.bin, where * represents any of additional characters, up to a total filename length of 256 characters.

4.Select the file, and then click Upload.

The following message box displays at the bottom of the page:

90