G L O S S A R YG
Absolute Pathname | The full path of a file, including the computer system and |
| any directories or subdirectories. For example, |
| c:\program files\monarch software\mpcl |
| toolbox\9855.phu |
Access Point | An interface between a wireless network and a wired |
| network. Access points can be used with Ethernet or |
| other communications to enable roaming throughout a |
| facility. |
A wireless network composed of devices that contain a | |
Network/Mode | network interface card and no access point. |
| |
| communications or BSS network. As long as the devices |
| are in range and are on the same channel and SSID, they |
| connect and communicate. Use this mode if a wireless |
| infrastructure does not exist or where services are not |
| required. |
Authentication | Identifies users on a network, based on a username and |
Method | password. There are two types: open and shared. |
| Authentication protocols include LEAP, PEAP, TLS, TTLS, |
| |
Auto Method | One of the available boot methods. Auto tries DHCP, |
| BOOTP, and RARP, then sets to the last IP address used |
| if the IP address is not automatically set using any of the |
| previous methods. |
BOOTP or | One of the available boot methods. It is a protocol used |
Bootstrap Protocol | by devices that know their MAC address, but do not know |
| their IP address. The device broadcasts its hardware |
| address and the BOOTP server responds with the IP |
| address for it. The network administrator must enter the |
| MAC address in the BOOTP Config file to obtain the IP |
| address from the server. |
Boot Method | The wireless print server uses this method to obtain an IP |
| address. Can be set to Auto, DHCP, BOOTP, RARP, or |
| Static. |
Boot Tries | The number of times the device tries to get an IP address |
| from the server when using the BOOTP and DHCP |
| methods. |
BSS or | A set of 802.11b/g devices operating as a fully connected |
Basic Service Set | wireless network. |
BSSID | See MAC Address. |