Chapter 1. Assembling the Station
5.At the rear of the Station (end closest to the side where the cabinet door opens), push the two axle mounts firmly into the sockets of the rear legs. (Figure 2.) Hold onto the uncapped end of the axle so the axle assembly stays together.
Axle
Caster
Mount
Socket
Figure 2
6.Place the other end cap onto the uncapped end of the axle. Press the cap firmly (with your thumb) to temporarily hold the cap in place.
7.Hold the axle firmly with one hand, while tapping the end cap onto the axle with a rubber mallet. Make sure the end cap fits firmly onto the axle.
8.Push the two casters into the sockets in the bottom of the front legs. (Figure 2.)
9.Tap the axle mounts and casters with a rubber mallet to fully seat them.