Paxar Monarch 9476 manual Negative

9476 Assembly and Setup Instructions

3.Place the battery on the cabinet floor. Remove the cardboard packaging. Use a 15mm bolt, washer, lockwasher, and M5 nut to attach the white battery wire to the positive (+) battery post. (Figure 11.)

	Negative (-)
Green	Positive (+)
Ground
Wire

Black

Wires

White

Wire

Figure 11

4.Slide the battery to the back of the cabinet.

5.Use a 15mm bolt, washer, lockwasher, and M5 nut to attach the two black wires and green (ground) wire to the negative (-) battery post. (Figure 11.)

6.Position the battery between the retainer rods. The writing on the battery should face out. (Figure 12.)

1-16