Paxar Monarch 9476 manual Attaching Optional Items

9476 Assembly and Setup Instructions

2.Open the Station’s cabinet. Press the chrome handle insert into the cabinet door and fasten it with two 5/8" phillips screws. (Figure 4.)

Cord

Bracket

Handle

Insert

Figure 4

3.Position the cord bracket over the mounting holes on the lower shelf ’s edge shown. Fasten the bracket with two 1/2" slotted screws and 8-32 nuts/lockwashers. (Figure 4.)

Step 4: Attaching Optional Items----------------------------------------------------------

This section describes how to attach the optional drop shelf, push handle, and data entry terminal cradle. Each optional item and necessary mounting hardware is packaged individually. These are optional items; if you did not order them, skip to step 5.

1-8