B a t c h S e p a r a t o r s
This command selects the use of batch separators. A batch separator is a tag with a wide black line across the top or a double length tag and is last tag in a batch. Your Operator’s Handbook shows the type of batch separator used by your printer.
When printing online, add 1 to your batch quantity. The batch separator does not add a tag to the total number of tags in a batch. (In offline operation a batch separator increases the batch count by one tag.)
The command structure is shown below, followed by an example.
| If using this batch separator packet, make | ||
| sure the batch header "MODE" value is set to | ||
|
| C. | |
Syntax |
|
|
|
{ S TYPE } | |||
Field | Contents | ||
S | Must be the letter ‘S’ to identify the batch separator selection. | ||
TYPE | A single digit to turn the batch separator selection on or off. | ||
| The resulting separator depends on the type of stacker you | ||
| are using. |