Paxar 9474 manual T e r i n g P r i n t D a t a f o r F i e l d s, SOCKS12

C = Continuous

D = On Demand

If you enter D (On Demand) in the MODE field on a printer with a knife, the value will default to C (Continuous).

;BATCH_NAME One to eight characters for the name of the batch. A priority batch name must begin with a decimal. For example:

.SOCKS12.

Each batch should have a unique name, or you can omit the name for automatic batch naming. If multiple batches are sent with the same name, all batches are stored with the same name. If you omit the batch name, the printer will generate unique names which begin with the letters "AUTO" and end with a 4-digit number. The 4-digit number is an increment and can have a value from 1-9999 (example: AUTO1354, where 1354 equals the increment).

Example {B11,200,2,5,2,0,3; p

The batch prints data using format 11 and prints 200 tickets. The printer cuts after each ticket is printed, including the last ticket (2) and each ticket will print 5 times. This is a two-part ticket. The format prints 2 times horizontally across each ticket. A double-length separator prints between batches (3). The batch name is automatically assigned by the printer, because there are no characters between the semi-colon and the record separator.

E n t e r i n g P r i n t D a t a f o r F i e l d s

Enter the data to print in each field after the batch header record as shown.

Syntax {B##,QUANTITY,CUT,REP,PARTS,0,MODE; BATCH_NAME p

T##;print data.. p B##;print data.. p

.

.

.}

Message Structures 3-21