Paxar 9474 manual Syntax, Lines, Dots

Syntax

{G##,0,0,0,0 p

;...dot codes... p ;...dot codes... p ;...dot codes... p

.

.

.}

Field	Contents
G##	Must begin with the letter ’G’ to identify this as a graphic data
	stream.
	The G is followed by a one or two digit number to identify the
	graphic image. Later you will use this number to insert the
	graphic into a format.
	Values:	0-99
	NOTE: If this graphic is used in offline batch entry, the printer
		assigns a name of GPH## where ## is the ID number
		assigned here.
ROW	Enter 0.
COLUMN	Enter 0.
LINES	Enter 0.
DOTS	Enter 0.
;dot codes	The first row of dot codes corresponds to the bottom row of
	dots in the image. Essentially, this means you are building
	the graphic image upside down in the data stream.

Note that since this record is a character string, it begins with a semi-colon (;). You can place up to 100 characters in each row.

Do not put any spaces in the dot code character string.

4-4 Using Graphics