The zero point is 1.5 mm or 0.060 inches from the left edge of the supply.
The unit of measurement is tenths of millimeters. The range must be less than the maximum width of the supply.
Values:
The following format data stream uses the graphic data defined earlier in this chapter. The graphic is inserted 20 mm from the bottom and 20 mm from the left edge of the supply.
The following batch data stream prints the following tag:
Example | G1,100,40 p |
The graphic number 1 is inserted into the format 10 millimeters from the bottom and 4 millimeters from the left edge of the print area.
Using Graphics