4.7.2 Fiber Optic Ports
Depending on the order code of the product, the RS416 can be equipped with several different types of fiber optic ports. The Transmit (TX) and Receive (RX) connections of each port must be properly connected and matched for proper link and operation. Modules populated on the top row of the device typically have locking mechanisms or tabs towards the top of the unit. Modules located on the bottom row of the device have locking mechanisms or tabs towards the bottom of the device.
The drawings in the following figures show each fiber optical connector style with a side and top view to allow the user to identify the proper cable connection orientation. If modules are populated on the bottom row of the device, the transceiver orientation will be reversed (i.e. RX and TX will be reversed).
Figure 20: 10FL ST connector | Figure 21: 100FX MTRJ connector Figure 22: 100FX ST connector |
Figure 23: 100FX LC connector Figure 24: 100FX SC connector
27
2008 RuggedCom Inc. All rights reserved | Rev104 |