Rugged Outback RS416 manual Ethernet Ports

5.3.2 Ethernet Ports

5.3.2.1 Copper Ports

Parameter	Specification	Notes
Speed	10/100 Mbps	Auto-negotiating
Duplex	FDX / HDX	Auto-negotiating
Cable-Type	> Category 5	Shielded/Unshielded
Wiring Standard	TIA/EIA T568A/B	Auto-Crossover, Auto-polarity
Max Distance	100 m
Connector	RJ45
Isolation	1.5 kV	RMS 1-minute

Table 11: Ethernet Ports - Copper Specifications

5.3.2.2 Fiber Optic Ports

The following sections detail fiber optic specifications on ports that can be ordered with the RS416. The user determines the type of optics at time of ordering and can determine the modules installed on a particular unit by reading the factory data file via the ROSTM user interface. The following section provides detailed specifications of fiber optic modules.

The dual-port fast Ethernet optical specifications for slots 5 and 6 are shown in Table 12 organized by module order code. Module order codes are contained within each product’s factory data when assembled and configured at the factory. Consult ROSTM to determine the optical assemblies installed in a particular product.

	Optics	Mode /		Tx λ		Cable		Tx Pwr		Rx		Rx		Typical		Power
						Type2		(dBm) 3		Sensitivity		Saturation		Distance		Budget
	Order Code	Connector		(nm)
						∝		(Min/Max)		(dBm) 3		(dBm) 3		(km) 1		(dB)
						( m)
12-11-0011		MM / ST	850		50/125		-16.5/-10.6		-34		-11.2		2		21
12-11-0012		SM / ST	1310		9/125		-27 / -14		-35		-3		5		8
12-11-0007		MM / ST
12-11-0009		MM / SC	1310		50/125		-15.7		-33.5		-11		2		17
12-11-0008		MM / MTRJ
12-11-0046		MM / LC	1310		50/125		-19 / -14		-32		-14		2		15
12-11-0006		SM / ST
12-11-0005		SM / SC	1310		9/125		-15/-8		-32		-7		20		16.5
12-11-0004		SM / LC
12-11-0031		SM / SC	1310		9/125		-5 / 0		-35		-3		50		32.5
12-11-0032		SM / LC
12-11-0033		SM / SC	1310		9/125		0 / 5		-37		0		90		39.5
12-11-0034		SM / LC

Table 12: Ethernet Ports – Fiber Optic Specifications

31

 2008 RuggedCom Inc. All rights reserved Rev104