Rugged Outback RS416 manual Serial Port Transient Protection

Page 25

4.6.5 Serial Port Transient Protection

RuggedCom does not recommend the use of copper cabling of any length for critical real-time substation automation applications. However, transient suppression circuitry is present on all copper ports to protect against damage from electrical transients and to ensure IEC 61850-3 and IEEE 1613 Class 1 conformance. This means that during the transient event communications errors or interruptions may occur but recovery is automatic.

RuggedCom also does not recommended to use these ports to interface to field devices across distances which could produce high levels of ground potential rise, (i.e. greater than 2500V) during line to ground fault conditions.

25

 2008 RuggedCom Inc. All rights reserved

Rev104

Image 25

Contents RuggedServer RS416 Trademarks Table of Contents Table of Tables Table of Figures 2008 RuggedCom Inc. All rights reserved Rev104 Product Overview Feature HighlightsFunctional Overview  2008 RuggedCom Inc. All rights reserved Rev104 Colour Description Display Panel DescriptionLEDs Green Solid Link Mode ColourMounting Installation19 Rack Mount Adapters Rack MountingPanel and DIN Rail Mounting RS416 Series PANEL/DIN Rail mounting diagram withRS416 Series Philips Screw Terminal Block Power Supply Wiring and GroundingChassis Ground is connected to the Safety Ground Power source is ACDescription Usage PS1 Live / +AC Power Supply Wiring Examples DC Power supply wiring examples DC Power Supply Wiring ExamplesInstalled within 3m of unit Must be installed and separately identifiedDual Power Supplies Wiring Examples Dielectric Strength Hipot Testing Dielectric Strength Hipot TestingFailsafe Alarm Relay Wiring Failsafe Alarm Relay WiringRS232 over RJ45 console cable pin-out Male RJ45 Console Port WiringFiber Serial Interface Serial PortsDB9 Female DCE Port pin-out 2 RS232/RS485/RS422 via DB9Shield 3 RS232/RS485/RS422 via RJ45RJ45 Port pin-out No internal termination is provided Conceptual recommended RS485 wiring diagram 4 RS485 WiringSerial Port Transient Protection Copper Ports Ethernet Ports+Rx +Tx No Connection Fiber Optic Ports 100FX LC connector 100FX SC connectorEthernet panel LED description Ethernet Panel DescriptionPower Supply Specifications Technical SpecificationsFailsafe Relay Contact Ratings Serial Ports Data Port SpecificationsEthernet Ports  2008 RuggedCom Inc. All rights reserved Rev104 Electrical Safety Levels Comments Type Test SpecificationsType Test Specification Atmospheric Environment 95%Operating Environment Mechanical SpecificationsMechanical Drawing Agency Approvals WarrantyAgency Standards Comments FCC Part 15, Class a Approved