RuggedCom RS910L manual Ieee 1613 Type Tests, IEC Environmental Type Tests

6.2 IEEE 1613 Type Tests

Test		Description		Test Levels
IEEE C37.90.3	ESD		Enclosure Contact	+/- 8kV
			Enclosure Air	+/- 15kV
IEEE C37.90.2	Radiated RFI		Enclosure ports	35 V/m
			Signal ports	+/- 4kV @ 2.5kHz
IEEE C37.90.1	Fast Transient		D.C. Power ports	+/- 4kV
			A.C. Power ports	+/- 4kV
			Earth ground ports	+/- 4kV
			Signal ports	2.5kV common mode @ 1MHz
IEEE C37.90.1	Oscillatory
			D.C. Power ports	2.5kV common & differential mode @ 1MHz
			A.C. Power ports	2.5kV common & differential mode @ 1MHz
			Signal ports	5 kV (Failsafe Relay)
IEEE C37.90	H.V. Impulse		D.C. Power ports	5 kV
			A.C. Power ports	5 kV
	Dielectric		Signal ports	2kVac (Failsafe Relay)
IEEE C37.90
			D.C. Power ports	2kVac
	Strength
			A.C. Power ports	2kVac

Table 17 - IEEE 1613 Type Tests

NOTE:

•If the unit contains copper ports the IEEE 1613 conformance is Class 1 (During disturbance errors may occur but recovery is automatic).

•If the unit contains all fiber ports the IEEE 1613 conformance is Class 2 (During disturbance no errors will occur).

6.3 IEC Environmental Type Tests

Test

Description Test Levels

Severity

Levels

IEC 60068-2-1

IEC 60068-2-2

IEC 60068-2-30

IEC 60255-21-1

Cold Temperature

Dry Heat

Humidity (Damp Heat,

Cyclic)

Vibration

Test Ad	-40 deg. C, 16 Hours
Test Bd	+85 deg. C, 16 Hours
Test Db	95% (non-condensing), 55 deg C, 6 cycles
Tests Fc	2g @ (10-150) Hz

N/A

N/A

N/A

Class 2

IEC 60255-21-2 Shock Tests Ea 30g @ 11ms

Table 18 - Environmental Type Tests

Class 2

	28
 2007 RuggedCom Inc. All rights reserved	Rev100