3Com Hub 1000 SX manual Changing the, Password, Configuring, Port Settings, Configuration menu

Changing the Password A-5

Changing the	You can change the password if you need to. The new password must be
Password	eight characters or fewer and cannot contain spaces or tabs.
	To change the password, enter:
	4
	You are prompted to enter the old password and then the new password,
	as shown in this example:

	***************************************************
	**	Hub 1000 Configuration Menu		**
	***************************************************
	[1]	Configure port settings
	[2]	Display hub status
	[3]	Update firmware image
	[4]	Change password
	[5]	Logout
	Enter choice -> 4
	Old password: *****
	New password: *******
	Re-enter new password: *******
	Password changed.
	The following sections show examples of how to use the Hub 1000 SX
	Configuration menu.
Configuring	Table A-1 summarizes the situations that require you to configure port
Port Settings	settings through the Port Configuration menu.
	Table A-1Situations That Require Configuring Port Settings
	Situation		Action
	You do not want a port to be connected.		Disable the port.
	A port cannot connect with a linked device.		Disable auto-negotiation. (Force
			the link.)
	A linked device does not support		Disable auto-negotiation. (Force
	auto-negotiation.		the link.)
	You are connecting to a server or a		Configure the uplink for
	10/100 Mbps switch through the uplink.		asymmetric flow control.