3Com 4228G, 4250T, 4226T manual Viewing, Automatically, Configured IP

Page 42

42CHAPTER 3: SETTING UP FOR MANAGEMENT

Viewing

If you allow the Switch to automatically configure its own IP information

Automatically

you need to discover and view the IP information before you can begin to

Configured IP

manage the Switch. You can discover the IP information in two ways:

Information

Using 3Com Network Supervisor — This application will auto-discover

 

 

the Switch and display the automatically allocated IP information

 

assigned to the Switch.

 

Connecting to the Console Port — Connect a workstation using a

 

console cable to the console port of the Switch. You can then view the

 

IP information automatically assigned to the Switch using the

 

command line interface (CLI).

Using 3Com Network You can use the 3Com Network Supervisor application provided on the Supervisor CD-ROM that accompanies your Switch to discover the automatically

allocated IP information.

1Connect your Switch to the network.

2Power-up the Switch and wait for two minutes.

3Launch 3Com Network Supervisor and run the Auto-discovery wizard.

3Com Network Supervisor will auto-discover the new Switch and display the IP information that has been automatically allocated to the Switch.

Most DHCP and BootP servers allow static IP addresses to be configured so that you know what IP address the Switch will be given. Refer to the documentation that accompanies your DHCP or BootP server.

If your network does not have a DHCP or BootP server, the workstation running 3Com Network Supervisor must be on the same subnet as the Switch, because Auto-IP addresses are non-routable.

Connecting to the Alternatively, you can view the automatically configured IP information Console Port via the command line interface (CLI) through a connection to the console

port. (This example describes a local connection to the console port, rather than a remote one via a modem.)

Pre-requisites

A workstation with terminal emulation software installed, such as Microsoft Hyperterminal. This software allows you to communicate with the Switch via the console port directly, or through a modem.

Documentation supplied with the terminal emulation software.

Image 42
Contents SuperStack 3Com Corporation 350 Campus Drive Marlborough, MA United States Government LegendContents Setting UP for Management Safety Information PIN -OUTSPage About this Guide Conventions Icon DescriptionConvention Description Related DocumentationAbout this Guide Introducing About the Switch FamilySwitch 4200 Family Front View DetailIntroducing the Superstack 3 Switch 4200 Series Color Indicates Port Status LEDs 10BASE-T/100BASE-TX ports Fiber GBICs1000BASE-T GBICs Port Status LEDs Gbic portsUnit LEDs Power/Self Test LEDColor Indicates Alert LEDSystem RPS. See Connecting a Redundant Power System on Rear View DetailRmon Alarm Feature Switch 4200 Family Automatic IP ConfigurationDuplex Mode Quality of Service QoSInstalling the Switch Package Contents Choosing a SuitableSite Rack-mounting Repeat steps 2 and 3 for the other side of the Switch Fitting a bracket for rack-mountingPlacing Units On Top of Each OtherStacking Units Switch 4200 Family Power-upPowering-up SequencePower/Self Test LED colors Color StateFiber cables Cross-over Cable Straight-through CableApproved Gbic The 3Com approved Gbic transceivers are TransceiversInstalling the Switch Gbic Installing the Switch Setting UP for Management Automatically configured IP information Setting UpConfigure IP information manually for your Switch or view OverviewManual IP Configuration Automatic IP ConfigurationSetting UP for Management Manually Configuring IP Information Pre-requisitesConnecting the Workstation to the Switch Configuring the Workstation with IP InformationSetting Up the Switch with IP Information Using Command Line Interface via Telnet Example top-level command line interface menu Connecting a workstation to the Switch via the console port Setting Up the Switch with IP Information Example top-level command line interface menu Configured IP ViewingAutomatically Viewing Automatically Configured IP Information Viewing IP Information via the Console Port Methods of Managing a Switch Refer to Setting Up Command Line Interface Management on Interface Management Command LineNetwork Using Telnet CLI Management viaSetting Up Web InterfaceChoosing a Browser Over the Network Setting Up SnmpManagement Protocol Snmp can manage a Switch if Management workstationDefault Users User Default Name Password Access LevelSecurity Device User Modify operation on the web interface Setting UP for Management Problem Solving For Technical Support information, see Appendix DPower LED does not light Solving ProblemsSolutions below On powering-up, the Power/Self Test LED lights yellowSolving Hardware Snmp fan fail trap hardware failure ProblemsSolving Communication Problems IP AddressingSolving Stack FormationHow do you obtain a registered IP Address? Solving Software Upgrade Problems Problem Solving Safety Information Important Safety Information This must be approved for the country where it is usedImportant Safety Information ’information de Sécurité Importante Schko Wichtige Sicherheitsinformationen Vorsicht Europe Appendix a Safety Information Pin to RS-232 25-pin Null Modem CablePC-AT Serial Cable Pin to 9-pinAssignments Modem CableRJ-45 Pin Pin Number 10/100 1000Pin Number 10/100 1000 Appendix B PIN-OUTS Switch 4226T 3C17300 Protocols Used for Administration Terminal EmulationSwitch 4250T 3C17302 Switch 4228G 3C17304 Product ServicesRegister Your PurchaseOnline Access SoftwareTroubleshoot DownloadsContact Us Country Telephone Number Latin America Telephone Technical Support and Repair800 876 Appendix D Obtaining Support for Your Product Index NumbersIndex Regulatory Notices

4250T, 4226T, 4228G specifications

The 3Com 4228G, 4226T, and 4250T are professional-grade network switches designed for businesses seeking to enhance their network infrastructure. These models offer robust performance and reliability, catering to various networking needs, from small offices to large enterprise environments.

The 3Com 4228G switch is a 28-port gigabit Ethernet switch designed for high-bandwidth applications. It provides 24 Gigabit Ethernet ports with 802.3af Power over Ethernet (PoE) capability, allowing devices such as IP phones and wireless access points to be powered directly through the Ethernet cables. This feature simplifies installation and reduces additional cabling costs. The switch also supports VLAN tagging for network segmentation, improving security and performance. Its advanced traffic management lets IT administrators prioritize network traffic effectively, ensuring critical applications receive the necessary bandwidth.

On the other hand, the 3Com 4226T is a 26-port gigabit Ethernet switch, primarily designed for environments requiring a high level of connectivity without PoE. It offers similar features to the 4228G, such as VLAN support and enhanced traffic management capabilities. The 4226T is ideal for businesses that do not require power over Ethernet yet need reliable, high-speed networking capabilities. With 26 ports, this switch is an excellent choice for medium-sized enterprises looking to upgrade their network infrastructure without overwhelming their existing resources.

The 3Com 4250T is a more advanced switch, offering 48 Gigabit Ethernet ports and a robust feature set suitable for more complex networking environments. It includes Layer 2 and Layer 3 functionality, allowing for advanced routing and switching capabilities, making it highly adaptable to various network designs. The 4250T also simplifies network management through its extensive configuration options and support for IPv6. Moreover, it features an efficient cooling system and reduced power consumption, aligning with today’s growing demand for energy-efficient solutions.

All three models utilize advanced technologies such as Spanning Tree Protocol (STP) for loop prevention, QoS mechanisms to prioritize traffic, and comprehensive security features to protect the network from unauthorized access. With their different port configurations and capabilities, the 3Com 4228G, 4226T, and 4250T switches provide exceptional performance and flexibility, making them ideal for businesses aiming to enhance their networking capabilities.