3Com Comprehensive Guide to SNMP Management on the Switch 4250T
Page 49

Setting Up SNMP Management 49

For the browser to operate the web interface correctly, JavaScript™ and Cascading Style Sheets must be enabled on your browser. These features are enabled on a browser by default. You will only need to enable them if you have changed your browser settings.

Web Management To manage a Switch using the web interface over an IP network:

Over the Network

1Check that you have the IP protocol correctly installed on your management workstation. You can check this by trying to browse the World Wide Web. If you can browse, the IP protocol is installed.

2Check you can communicate with the Switch by entering a ping command at the DOS prompt in the following format:

c:\ ping xxx.xxx.xxx.xxx

(where xxx.xxx.xxx.xxx is the IP address of the Switch)

If you get an error message, check that your IP information has been entered correctly and the Switch is powered up.

3Open your web browser and enter the IP address of the Switch that you wish to manage in the URL locator, for example, in the following format:

http://xxx.xxx.xxx.xxx

4At the login and password prompts, enter admin as your user name and press Return at the password prompt (or the password of your choice if you have already modified the default passwords).

5Click on the Device View button to display the web management options.

Setting Up SNMP

Any network management application running the Simple Network

Management

Management Protocol (SNMP) can manage a Switch if:

 

■ The correct Management Information Bases (MIBs) are installed on the

 

management workstation.

 

■ The management workstation is connected to the Switch using a port

 

in VLAN 1 (the Default VLAN). By default, all ports on the Switch are in

 

VLAN 1.

 

You can use the 3Com Network Supervisor application that is provided on

 

the CD-ROM that accompanies your Switch to provide SNMP

 

management for your Switch. If you use 3Com Network Supervisor it

 

automatically loads the correct MIBs and necessary files onto your

 

workstation.

Page 48 Page 50
Image 49
Page 48 Page 50
Contents SuperStack United States Government Legend 3Com Corporation 350 Campus Drive Marlborough, MAContents Setting UP for Management PIN -OUTS Safety InformationPage About this Guide Icon Description ConventionsConvention Description Documentation RelatedAbout this Guide Introducing Family About the SwitchFront View Detail Switch 4200 FamilyIntroducing the Superstack 3 Switch 4200 Series 1000BASE-T GBICs Fiber GBICsColor Indicates Port Status LEDs 10BASE-T/100BASE-TX ports Port Status LEDs Gbic portsColor Indicates Power/Self Test LEDUnit LEDs Alert LEDRear View Detail System RPS. See Connecting a Redundant Power System onDuplex Mode Feature Switch 4200 Family Automatic IP ConfigurationRmon Alarm Quality of Service QoSInstalling the Switch Choosing a Suitable Package ContentsSite Rack-mounting Fitting a bracket for rack-mounting Repeat steps 2 and 3 for the other side of the SwitchTop of Each Other Placing Units OnStacking Units Powering-up Power-upSwitch 4200 Family SequenceColor State Power/Self Test LED colorsCross-over Cable Straight-through Cable Fiber cablesTransceivers Approved Gbic The 3Com approved Gbic transceivers areInstalling the Switch Gbic Installing the Switch Setting UP for Management Configure IP information manually for your Switch or view Setting UpAutomatically configured IP information OverviewAutomatic IP Configuration Manual IP ConfigurationSetting UP for Management Pre-requisites Manually Configuring IP InformationConfiguring the Workstation with IP Information Connecting the Workstation to the SwitchSetting Up the Switch with IP Information Using Command Line Interface via Telnet Example top-level command line interface menu Connecting a workstation to the Switch via the console port Setting Up the Switch with IP Information Example top-level command line interface menu Viewing Configured IPAutomatically Viewing Automatically Configured IP Information Viewing IP Information via the Console Port Methods of Managing a Switch Refer to Setting Up Command Line Interface Management on Network Using Telnet Command LineInterface Management CLI Management viaInterface Setting Up WebChoosing a Browser Management Protocol Snmp can manage a Switch if Setting Up SnmpOver the Network Management workstationUser Default Name Password Access Level Default UsersSecurity Device User Modify operation on the web interface Setting UP for Management For Technical Support information, see Appendix D Problem SolvingSolutions below Solving ProblemsPower LED does not light On powering-up, the Power/Self Test LED lights yellowSolving Communication Problems ProblemsSolving Hardware Snmp fan fail trap hardware failure IP AddressingFormation Solving StackHow do you obtain a registered IP Address? Solving Software Upgrade Problems Problem Solving Safety Information This must be approved for the country where it is used Important Safety InformationImportant Safety Information ’information de Sécurité Importante Schko Wichtige Sicherheitsinformationen Vorsicht Europe Appendix a Safety Information PC-AT Serial Cable Null Modem CablePin to RS-232 25-pin Pin to 9-pinRJ-45 Pin Modem CableAssignments Pin Number 10/100 1000Pin Number 10/100 1000 Appendix B PIN-OUTS Switch 4226T 3C17300 Terminal Emulation Protocols Used for AdministrationSwitch 4250T 3C17302 Switch 4228G 3C17304 Register Your ServicesProduct PurchaseTroubleshoot Access SoftwareOnline DownloadsContact Us Latin America Telephone Technical Support and Repair Country Telephone Number800 876 Appendix D Obtaining Support for Your Product Numbers IndexIndex Regulatory Notices

4250T, 4226T, 4228G specifications

The 3Com 4228G, 4226T, and 4250T are professional-grade network switches designed for businesses seeking to enhance their network infrastructure. These models offer robust performance and reliability, catering to various networking needs, from small offices to large enterprise environments.

The 3Com 4228G switch is a 28-port gigabit Ethernet switch designed for high-bandwidth applications. It provides 24 Gigabit Ethernet ports with 802.3af Power over Ethernet (PoE) capability, allowing devices such as IP phones and wireless access points to be powered directly through the Ethernet cables. This feature simplifies installation and reduces additional cabling costs. The switch also supports VLAN tagging for network segmentation, improving security and performance. Its advanced traffic management lets IT administrators prioritize network traffic effectively, ensuring critical applications receive the necessary bandwidth.

On the other hand, the 3Com 4226T is a 26-port gigabit Ethernet switch, primarily designed for environments requiring a high level of connectivity without PoE. It offers similar features to the 4228G, such as VLAN support and enhanced traffic management capabilities. The 4226T is ideal for businesses that do not require power over Ethernet yet need reliable, high-speed networking capabilities. With 26 ports, this switch is an excellent choice for medium-sized enterprises looking to upgrade their network infrastructure without overwhelming their existing resources.

The 3Com 4250T is a more advanced switch, offering 48 Gigabit Ethernet ports and a robust feature set suitable for more complex networking environments. It includes Layer 2 and Layer 3 functionality, allowing for advanced routing and switching capabilities, making it highly adaptable to various network designs. The 4250T also simplifies network management through its extensive configuration options and support for IPv6. Moreover, it features an efficient cooling system and reduced power consumption, aligning with today’s growing demand for energy-efficient solutions.

All three models utilize advanced technologies such as Spanning Tree Protocol (STP) for loop prevention, QoS mechanisms to prioritize traffic, and comprehensive security features to protect the network from unauthorized access. With their different port configurations and capabilities, the 3Com 4228G, 4226T, and 4250T switches provide exceptional performance and flexibility, making them ideal for businesses aiming to enhance their networking capabilities.
Top Page Image Contents