123Com Switch 4200G Family Command Reference
display ip socket
Use the display ip socket command to display the information about the sockets in the current system.
Any view
display ip statistics
Use the display ip statistics command to view the statistics information about IP packets.
Any view
display isolate port
Use the display isolate port command to display the information about the Ethernet ports added to an isolation group.
Any view
display lacp system-id
Use the display lacp system-idcommand to view actor system ID, including system priority and system
MAC address.
Any view
display link-aggregation interface
Use the display link-aggregation interface command to display the link aggregation details about a specified port or port range.
Any view
Use the display link-aggregation interface command to display the link aggregation details about a specified port or port range, including:
display link-aggregation summary
Use the display link-aggregation summary command to display summary information of all aggregation groups, including device ID of the local end, aggregation group ID, aggregation group type, device ID of the remote end, number of the selected ports, number of the unselected ports, load sharing type and master port number.
Any view
display link-aggregation verbose
Use the display link-aggregation verbose command to display the details about a specified aggregation group.
Any view
display local-server statistics
Use the display local-server statistics command to view the statistics of all local RADIUS authentication server.
Any view
display local-user
Use the display local-usercommand to view information about all the local users or the specified one(s).
Any view
display logbuffer
Use the display logbuffer command to display the status of the log buffer and the records in the log buffer.
Any view
display logbuffer summary
Use the display logbuffer summary command to display the summary of the log buffer.
Any view
display-loopback-detection
Use the display loopback-detectioncommand to display the loopback detection status on the port.
Any view
display mac-address
Use the display mac-addresscommand to display MAC address table information.
Any view
display mac-address aging-time
Use the display mac-addressaging-timecommand to display the aging time of the dynamic entry in the
MAC address table.
Any view
display mac-address multicast static
Use the display mac-address multicast static command to display the multicast MAC address entries manually configured on the switch, with each entry containing the following information: multicast MAC address, VLAN ID, MAC address state, port number(s), and aging time of each port.
Any view
