3Com 10014917 manual Ethernet Port view Web command Port Administration, Sftp Client view

18	3Com Switch 4200G Family
	Command Reference

dot1x dhcp-launch

Use the dot1x dhcp-launchcommand to specify an 802.1x-enabled switch to launch the process to authenticate a supplicant system when the supplicant system applies for a dynamic IP address through DHCP.

System view

dot1x guest-vlan

Use the dot1x guest-vlancommand to enable the Guest VLAN function for specified ports.

System view

Ethernet Port view

dot1x max-user

Use the dot1x max-usercommand to set the maximum number of systems an Ethernet port can accommodate.

System view

Ethernet Port view

dot1x port-control

Use the dot1x port-controlcommand to specify the access control method for specified Ethernet ports.

System view

Ethernet Port view

dot1x port-method

Use the dot1x port-methodcommand to specify the access control method for specified Ethernet ports.

Ethernet Port view

dot1x quiet-period

Use the dot1x quiet-periodcommand to enable the quiet-period timer.

System view

dot1x retry

Use the dot1x retry command to specify the maximum number of times a switch can transmit the authentication request frame to supplicant systems.

System view

dot1x retry-version-max

Use the dot1x retry-version-maxcommand to set the maximum number of retries for a switch to send version request packets to an online supplicant system.

System view

dot1x timer

Use the dot1x timer command to set the 802.1x timers.

System view

dot1x version-check

Use the dot1x version-checkcommand to enable 802.1x client version checking for specified Ethernet ports.

System view

Ethernet Port view

duplex

Use the duplex command to set the port duplex attribute.

Ethernet Port view

Web command: Port -> Administration

enable snmp trap updown

Use the enable snmp trap updown command to enable the port to send LINK UP and LINK DOWN Trap information.

System view

end-station polling ip-address

Use the end-station polling ip-addresscommand to configure the IP address requiring periodic testing.

System view

execute

Use the execute command to execute the specified batch file.

System view

exit

Use the exit command to terminate the connection to the remote SFTP server and return to system view.

This command has the same function as the bye and quit commands.

SFTP Client view