3Com 10014917 manual Use the port-security enable command to enable port security

28	3Com Switch 4200G Family
	Command Reference

port hybrid pvid vlan

Use the port hybrid pvid vlan command to configure the default VLAN ID of the hybrid port.

Ethernet Port view

port hybrid vlan

Use the port hybrid vlan command to add the port to the specified VLAN(s). The port needs to have been made a hybrid port before you can do this. See the related command below.

Ethernet Port view

port isolate

Use the port isolate command to add an Ethernet port to the isolation group.

Ethernet Port view

port link-aggregation group

Use the port link-aggregation group agg_id command to add an Ethernet port to a manual or static aggregation group.

Ethernet Port view

port link-type

Use the port link-typecommand to configure the link type of the Ethernet port.

Ethernet Port view

port-security enable

Use the port-security enable command to enable port security.

System view

port-security intrusion-mode

Use the port-securityintrusion-modecommand to set the action mode of the Intrusion Protection feature.

Ethernet Port view

port-security max-mac-count

Use the port-securitymax-mac-countcommand to set the maximum number of MAC addresses allowed to access the port.

Ethernet Port view

port-security ntk-mode

Use the port-securityntk-modecommand to set the packet transmission mode of the Need to Know (NTK) feature.

Ethernet Port view

port-security OUI

Use the port-security OUI command to set an OUI value for authentication.

System view

port-security port-mode

Use the port-securityport-modecommand to set the security mode of the port.

Ethernet Port view

port-security timer disableport

Use the port-security timer disableport command to set the time during which the system temporarily disables a port.

System view

port-security trap

Use the port-security trap command to enable the sending of the specified type(s) of trap messages.

System view

port trunk pvid vlan

Use the port trunk pvid vlan command to configure the default VLAN ID for a trunk port.

Ethernet Port view

port trunk permit vlan

Use the port trunk permit vlan command to add a trunk port to one VLAN, a selection of VLANs, or all

VLANs.

Ethernet Port view

primary accounting

Use the primary accounting command to set the IP address and port number for the primary accounting server.

RADIUS Scheme view