3Com 10014917 manual ISP Domain view, Dhcp Address Pool view, Radius Scheme view

2	3Com Switch 4200G Family
	Command Reference

Displaying Command Parameters

At the prompt, enter the name of the command followed by a space and ?. For example:

<sw4200G>boot ?

The following parameters are displayed:

attribute-switch	Exchange the file main-attribute and backup-attribute.
boot-loader	Select a file to boot at the next time
bootrom	Update Bootrom
web-package	Set web resource package

To specify boot loader, enter the command as follows:

<sw4200G>boot boot-loader ?

You only need to enter ? if parameters exist for the command.

Displaying Parent Menus

At the prompt, enter quit.

Displaying the User View Menu

Press <CTRL-Z>.

Obtaining Help

At the prompt, enter ?.

Further Information

For further information about how to use the command line interface, refer to the Command Reference Guide and the Configuration Guide, which are both available as PDF documents on the CD that accompanied the unit.

Commands

access-limit

Use the access-limitcommand to set the maximum number of access users that can be contained in current ISP domain.

ISP Domain view

accounting

Use the accounting command to configure an accounting scheme for the current ISP domain.

ISP Domain view

accounting domain

Use the accounting domain command to enable the DHCP accounting function.

DHCP Address Pool view

accounting-on enable

Use the accounting-on enable command to enable user re-authentication upon device restart function.

RADIUS Scheme view

accounting optional

Use the accounting optional command to open the accounting-optional switch.

ISP Domain view

RADIUS Scheme view

acl

Use the acl command to reference ACL and implement the ACL control to the TELNET users.

User Interface view

Web command: Security -> Authorized IP