3Com 10014917 manual System view Web command Administration Snmp Setup

3Com Switch 4200G Family	39
Command Reference

stp port priority

Use the stp port priority command to set the priority of the current port in a specified spanning tree instance.

Ethernet Port view

stp priority

Use the stp priority command to set the priority of a switch in a spanning tree instance.

System view

stp region-configuration

Use the stp region-configurationcommand to enter MST region view.

System view

stp root primary

Use the stp root primary command to configure the current switch to be the root bridge of a specified spanning tree instance.

System view

stp root-protection

Use the stp root-protectioncommand to enable the root protection function for the current port.

Ethernet Port view

stp root secondary

Use the stp root secondary command to configure the current switch as a secondary root bridge of a specified spanning tree instance.

System view

stp tc-protection

Use the stp tc-protectioncommand to enable or disable the TC-BPDU attack prevention function for the switch.

System view

stp timer-factor

Use the stp timer-factorcommand to set the timeout time of a switch in terms of the multiple of the Hello time.

System view

stp timer forward-delay

Use the stp timer forward-delaycommand to set the Forward delay for a switch.

System view

stp timer hello

Use the stp timer hello command to set the Hello time for a switch.

System view

stp timer max-age

Use the stp timer max-agecommand to set the maximum age of a switch.

System view

stp transmit-limit

Use the stp transmit-limitcommand to set the maximum number of configuration BPDUs the current port can transmit within a Hello time.

Ethernet Port view

super

Use the super command to switch the current user level to the one identified by the level argument.

User view

super password

Use the super password command to set the password for users to switch to a higher user level.

System view

sysname

Use the sysname command to set a domain name for the switch.

System view

Web command: Administration -> SNMP -> Setup

sysname

Use the sysname command to set the system name of the Switch.

System view

system-view

Enter system-viewto enter the system view from the user view.

User view