3Com 10014917 manual User view Web command Administration Restore Configuration

3Com Switch 4200G Family	37
Command Reference

ssh2

Use the ssh2 command to enable the connection between SSH client and server, define key exchange algorithm preference, encryption algorithm preference and HMAC algorithm preference on the server and client.

System view

startup bootrom-access enable

Use the startup bootrom-access enable command to specify a switch to prompt for the customized password before entering the BOOT menu.

User view

startup saved-configuration

Use the startup saved-configurationcommand to specify the main or backup configuration file for a switch to start the next time.

User view

Web command: Administration -> Restore Configuration

state

Use the state command to configure the state of the current ISP domain/current user.

ISP Domain view

Local User view

RADIUS view

state

Use the state command to configure the state of RADIUS server.

RADIUS Scheme view

stop-accounting-buffer enable

Use the stop-accounting-buffer enable command to enable the switch to buffer the stop-accounting requests that bring no response.

RADIUS Scheme view

stopbits

Use the stopbits command to set the stop bits of the user interface.

User Interface view

stp

Use the stp command to enable or disable MSTP globally or for a port.

System view

Ethernet Port view

Web command: Device -> Spanning Tree

Port -> Spanning Tree Per Port

stp bpdu-protection

Use the stp bpdu-protectioncommand to enable the BPDU protection function.

System view

stp bridge-diameter

Use the stp bridge-diametercommand to set the network diameter of a switched network, which is represented in terms of the maximum number of switches between any two terminals in a switched network.

System view

stp config-digest-snooping

Use the stp config-digest-snoopingcommand to enable the digest snooping feature.

Ethernet Port view

stp cost

Use the stp cost command to set the path cost of a port in a spanning tree instance.

Ethernet Port view

stp edged-port

Use the stp edged-portcommand to configure the current Ethernet port as either an edge port or a non-edge port.

Ethernet Port view

stp interface

Use the stp interface command in system view to enable or disable MSTP for specified ports.

System view

stp interface config-digest-snooping

Use the stp interface config-digest-snoopingcommand to enable the digest snooping feature.

System view