Rosewill RGS-1024 user manual Power On, Fasten the Switch in the rack

Page 11

24-Port Gigabit Ethernet Switch RGS-1024		User Manual

Figure 2-2 Fasten the Switch in the rack

2.3 Power On

RGS-1024 24-port Gigabit Ethernet Switch is powered by AC power supply. Powering on the Switch, it will automatically initialize and its LED indicators should respond as follows:

1） All of the Link/Act and 1000Mbps LED indicators will ﬂash momentarily for one second, which represents a resetting of the system.

2） The Power indicator will light up.

If the LED indicators don't respond as described above, please check the power supply and connection.

-10-

Image 11

Contents Port Gigabit Ethernet Switch RGS-1024 Copyright & Trademarks FCC Statement CE Mark Warning Safety WarningPort Gigabit Ethernet Switch RGS-1024 Package Contents Overview of the Product Introduction of the ProductIeee 802.1p QoS FeaturesPort Gigabit Ethernet Switch RGS-1024 Mounting the Switch in a Rack InstallationMounting the Switch on a Desk Fasten the Switch in the rack Power OnRear Panel LED IndicatorsIdentifying External Components Front PanelPort Gigabit Ethernet Switch RGS-1024 General Appendix a SpecificationsEnvironmental and Physical Power LED is not lit Appendix B Troubleshooting