Rosewill user manual Port Gigabit Ethernet Switch RGS-1024

Page 5

24-Port Gigabit Ethernet Switch RGS-1024

User Manual

 

 

 

Do not use the device outside, and make sure all the connections are indoors.

Do not obstruct the device ventilation slots, as insufficient airflow may harm your device.

Do not use this product near water, eg, in wet basement, or near a swimming pool.

Do not expose your device to dampness, dust or corrosive liquids.

Do not install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning.

Connect ONLY suitable accessories to the device.

Do not open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY qualified service personnel should service or disassemble this device. Please contact your vendor for further information.

Make sure to connect the cables to the correct ports.

If you wall mount your device, make sure that no electrical lines, gas or water pipes will be damaged.

Your product is marked with this symbol, which is known as the WEEE mark. WEEE stands for Waste Electronics and Electrical Equipment. It means that used electrical and electronic products should not be mixed with general waste. Used electrical and electronic equipment should be treated separately.

-4-

Image 5
Contents Port Gigabit Ethernet Switch RGS-1024 Copyright & Trademarks FCC Statement CE Mark Warning Safety WarningPort Gigabit Ethernet Switch RGS-1024 Package Contents Overview of the Product Introduction of the ProductIeee 802.1p QoS FeaturesPort Gigabit Ethernet Switch RGS-1024 Mounting the Switch in a Rack InstallationMounting the Switch on a Desk Fasten the Switch in the rack Power OnIdentifying External Components LED IndicatorsFront Panel Rear PanelPort Gigabit Ethernet Switch RGS-1024 General Appendix a SpecificationsEnvironmental and Physical Power LED is not lit Appendix B Troubleshooting