Rosewill RGS-1024 user manual CE Mark Warning, Safety Warning

Page 4

24-Port Gigabit Ethernet Switch RGS-1024

User Manual

 

 

 

CE Mark Warning

This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Safety Warning

Place connecting cables carefully so that no one will step on them or stumble over them.

Always disconnect all cables from this device before servicing or disassembling.

Use ONLY an appropriate power adaptor or cord for your device.

Connect the power adaptor or cord to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe).

Do not allow anything to rest on the power adaptor or cord and do not place the product where anyone can walk on the power adaptor or cord.

Do not use the device if the power adaptor or cord is damaged as it might cause electrocution.

If the power adaptor or cord is damaged, remove it from the power outlet.

Do not attempt to repair the power adaptor or cord. Contact your local vendor to order a new one.

-3-

Image 4
Contents Port Gigabit Ethernet Switch RGS-1024 Copyright & Trademarks FCC Statement Safety Warning CE Mark WarningPort Gigabit Ethernet Switch RGS-1024 Package Contents Introduction of the Product Overview of the ProductFeatures Ieee 802.1p QoSPort Gigabit Ethernet Switch RGS-1024 Mounting the Switch on a Desk InstallationMounting the Switch in a Rack Power On Fasten the Switch in the rackLED Indicators Identifying External ComponentsFront Panel Rear PanelPort Gigabit Ethernet Switch RGS-1024 Appendix a Specifications GeneralEnvironmental and Physical Appendix B Troubleshooting Power LED is not lit