Rosewill user manual Port Gigabit Ethernet Switch RGS-1024

Page 13

24-Port Gigabit Ethernet Switch RGS-1024		User Manual

of the Switch. The following section shows the LED indicators for the switch along with an explanation of each indicator.

Figure 3-3 RGS-1024 Switch LEDs sketch

¾POWER LED: This indicator will light solid red when the Switch powers up. If the LED is not lit, please check the power supply and connection.

¾Link/Act LED: This indicator will light solid green when the corresponding port is connected to another device and will ﬂash green when data is being transmitted or received on the working connection.

¾1000Mbps LED: This indicator will light solid green when the corresponding port is connected to a 1000Mbps device.

-12-

Image 13

Contents Port Gigabit Ethernet Switch RGS-1024 Copyright & Trademarks FCC Statement CE Mark Warning Safety WarningPort Gigabit Ethernet Switch RGS-1024 Package Contents Overview of the Product Introduction of the ProductIeee 802.1p QoS FeaturesPort Gigabit Ethernet Switch RGS-1024 Mounting the Switch on a Desk InstallationMounting the Switch in a Rack Fasten the Switch in the rack Power OnIdentifying External Components LED IndicatorsFront Panel Rear PanelPort Gigabit Ethernet Switch RGS-1024 General Appendix a SpecificationsEnvironmental and Physical Power LED is not lit Appendix B Troubleshooting