Rosewill RGS-1024 Identifying External Components, Front Panel, Rear Panel, LED Indicators

Page 12

24-Port Gigabit Ethernet Switch RGS-1024		User Manual

Chapter 3. Identifying External Components

This Chapter describes the front panel, rear panel and LED indicators of the Switch.

3.1 Front Panel

The front panel of the RGS-1024 consists of switch LED indicators, 24 10/100/1000Mbps RJ-45 ports.

Figure 3-1 RGS-1024 Switch Front Panel sketch

3.2 Rear Panel

The rear panel of the RGS-1024 only features a power receptacle, which is an AC power receptacle. Connect the female of the power cord head here, and the male head to the AC power outlet.

Figure 3-2 RGS-1024 Switch Rear Panel sketch

3.3 LED Indicators

The LED indicators include Power, Link/Act and 1000Mbps LED indicators, which are used for monitoring and pre- troubleshooting

-11-

Image 12

Contents Port Gigabit Ethernet Switch RGS-1024 Copyright & Trademarks FCC Statement Safety Warning CE Mark WarningPort Gigabit Ethernet Switch RGS-1024 Package Contents Introduction of the Product Overview of the ProductFeatures Ieee 802.1p QoSPort Gigabit Ethernet Switch RGS-1024 Installation Mounting the Switch on a DeskMounting the Switch in a Rack Power On Fasten the Switch in the rackLED Indicators Identifying External ComponentsFront Panel Rear PanelPort Gigabit Ethernet Switch RGS-1024 Appendix a Specifications GeneralEnvironmental and Physical Appendix B Troubleshooting Power LED is not lit