Rose electronic 4X, 8X, 16X manual Kvm Cpu

System status

System status

Computers	Power			Pos		Ver	KVM	CPU	User		Status
1-4			1		22		PC	1		User 1		View mode
5-8			2		22		PC	2		User 2		Share mode
9-12			3		22		PC	3		User 3		Share mode
13-16			4		22		Sun	4		User 4		Share mode
17-20												No response
21-24												No response
25-28												No response
29-32												No response
33-36												No response
37-40												No response
41-44												No response
15-48												No response
19-52												No response
53-56												No response
57-60												No response
61-64												No response
Pos = Card position Ver = Program version KVM = PC/Sun/None
CPU power		= on	= off Line color Good Disconnected Error

Figure 25. System status display

The system status display is a very powerful and useful tool when monitoring, expanding, troubleshooting, or reconfiguring a system. The status screen displays reported information from all CPU cards in the system.

Computers

Indicates the CPU port numbers for a given CPU card. Highlighted computers are the total connected CPU ports in the system.

Power

Each CPU card represents 4 CPU ports. These ports are represented by the four squares. The CPU ports are (Left square to right square), CPU port 1, port 2, port 3, and port 4. (Green = CPU is on, Red = CPU is off)

Pos (Position)

Displays the slot where a CPU card in the system is installed for a given switch. Slot 1 is the bottom CPU card.

Ver (Version)

Displays the last three digits of the firmware main program version for the CPU card.

KVM

Indicates the type of keyboard and mouse detected if a KVM station is attached to this CPU card.

CPU

Displays the computer number currently selected by the KVM station.

User

Displays the users name that is currently accessing the system.

Status

Displays the most recent connect or disconnect status for the KVM station on this CPU card.

ULTRAMATRIX “UMX” SERIES INSTALLATION AND OPERATIONS MANUAL

37