Start (Default: 0)
Assigns the CPU port number the KVM station will connect to on start up and login. 0 = no connection. To change the value, select it from the menu and press [Enter]. Type in the CPU port number the selected KVM station will connect to upon start up or login and press [Enter].
User (Default: User 1, 2, 3, and 4
This field is used to assign a specific user to a KVM station. To change the user, first select the KVM station, then select the user field and press [Enter]. A selection box will display a list of user names followed by “Login”. Select the user to assign to the selected KVM station and press [Enter]. Use the page up/down keys to display more users. If “Login” is selected, the KVM user must login with their user ID and assigned password to gain access to the KVM station.
The configure user, profile, and group menus all tie together to provide access control to the computers. A group defines which computers in the system can and cannot be accessed. This group is assigned to a profile name. The profile defines how the computers (defined by the group) can be accessed. The profile is then assigned to a user or users.
When a user logs on to a KVM station, their assigned profile is validated. This profile defines which group has been assigned (which computers can be accessed), what mode the user can connect to the computers with (view, share, control, private), the share time, scan time, and logout time.
ULTRAMATRIX “UMX” SERIES INSTALLATION AND OPERATIONS MANUAL
31 |