TDK J Series JBW specifications JBW150W Type

(14/30)

JBW150W Type

SPECIFICATIONS AND STANDARDS

Part No.			JBW05-30R	JBW12-12R	JBW15-10R	JBW24-6R3	JBW48-3R2
Rated output voltage and current∗			5V • 30A	12V • 12A	15V • 10A	24V • 6.3A	48V • 3.2A
Maximum output power		W	150	150	150	151.2	153.6
Input conditions
Input voltage Eac/Edc		V	85 to 265[Rating: 100-240]/120 to 370
Input frequency		Hz	47 to 66
Input current		A	2.7/1.5max.[100-240V]
Surge current		A	30/60max.[100-240V]
Leakage current		mA	0.75/0.75max.[AC.100V(DENAN)/240V(UL, IEC)]
Power factor			0.99/0.95typ.[100-240V]
Efficiency		%	78/80typ.	81/83typ.	81/83typ.	82/84typ.	82/84typ.
			[100-240V]	[100-240V]	[100-240V]	[100-240V]	[100-240V]
Output characteristics
Output voltage Edc		V	5	12	15	24	48
Voltage variable range Edc		V	4.5 to 5.5	10.8 to 13.2	13.5 to 16.5	21.6 to 26.4	43.2 to 52.8
Maximum output current		A	30	12.5	10	6.3(Peak7.5)	3.2
Overvoltage threshold Edc		V	5.75 to 6.9	13.8 to 16.8	17.2 to 21	27.6 to 33.6	55.2 to 67.2
Overcurrent threshold		A	31.5min.	15.7min.	12.5min.	7.87min.	3.36min.
	Source effect	%	0.4max.[Within the input voltage range]
Voltage	Load effect	%	0.8max.[0 to 100% load]
	Temperature effect	%	1max.[Ambient temperature: –10 to +60°C]
stability
	Drift(Time effect)	%	0.4max.[25°C, input and output ratings, after input voltage ON for 30min to 8h]
	Recovery	%	±4max.[50 to 100% sudden load change]
Ripple Ep-p		mV	80max.	120max.	120max.	120max.	150max.
Ripple noise Ep-p		mV	120max.	150max.	150max.	150max.	350max.
Start up time		ms	500max.(400typ.)/500max.(300typ.)[AC.100/240V]
Hold up time		ms	25/35typ.[AC.100/240V]
Auxiliary functions
Indicator display			No
Overvoltage protection			Voltage shut-down type(Latch).
Overcurrent protection			Rectangular type, automatic recovery.
Remote ON-OFF			No
Remote sensing			No
Standards
Safety standards			UL60950-1, CSA C22.2 No.60950-1(C-UL), EN60950-1(TÜV) approved.
Noise terminal voltage			FCC-B, VCCI-B, EN55011-B, EN55022-B meet.
Input harmonics current requirement			EN61000-3-2
CE marking			Meet.
Constructions
External dimensions		mm	40⋅ 75⋅ 222[H⋅ W⋅ L]
Weight		g	550max.
Mounting method			Can be attached to 1 side.
Case metal			FR4

∗Current rating(maximum output current) is determined for –10 to +40°C. Derating is required when used outside this temperature range.

• All specifications are subject to change without notice.

004-02 / 20070523 / ea122_jbw