Quantum PlatiniX 2 manual ATX12V Power Supply Connectors & Power Switch Power SW

Page 10

Installation Instructions

Line-in jack, Microphone-in jack, Speaker-out jack and MIDI/Joystick Connector (available on PlatiniX 2-A/-AL, PlatiniX 2I-A/-AL)

The Line-in jack can be connected to devices such as a cassette or minidisc player to playback or record. The Microphone-in jack can be connected to a microphone for voice input. The Speaker-out jack allows you to connect speakers or headphones for audio output from the internal amplifier.The MIDI/Joystick connector allows you to connect a game joystick or a MIDIdevice.

MIDI/Joystick

Optional

Speaker out

Line in

Microphone in

ATX12V Power Supply Connectors & Power Switch (POWER SW)

The PlatiniX 2 series of mainboards must use ATX12V power supply. Be sure to connect the ATX 12V power supply plugs to the connectors in their proper orientation. The difference between ATX12V power supply and ATX power supply is that ATX12V power supply provides two additional power connectors: AUX power connector and +12V power con- nector.

The power switch (POWER SW) should be connected to a momentary switch. When powering up your system, first turn on the mechanical switch of the power supply (if one is provided), then push once the power switch. When powering off the system, you needn’t turn off the mechanical switch, just Push once* the power switch.

 

12V

12V

 

 

 

 

 

 

+12V Power Supply Connector

 

1

 

 

 

 

 

GND GND

 

 

 

 

 

ATX Power Supply Connector

 

 

5V

5 V

-5V GND GND GNDPS-ONGND -12V 3.3V

 

20

 

 

 

 

 

 

 

 

 

1

 

12V 5VSB PW-OKGND 5V

GND 5V GND 3.3V

3.3V

 

AUX Power Supply Connector

 

POWER

1

 

 

 

 

SW

GND

GND

GND 3.3V

3.3V 5V

 

 

 

Note: * If you change “soft-off by PWR-BTTN” from default “Instant-off” to “Delay 4 Sec” in the “POWER MANAGEMENT SETUP” section of the CMOS SETUP, the power button should be pressed for more than 4 seconds before the system powers down.

Manual for PlatiniX 2 series

Image 10
Contents Declaration of Conformity Manufacturer Quantum Designs HK Inc Contents Appendix Bios DescriptionQDI Driver CD ManageEasy BIOS-ProtectEasy Norton AntiVirus PlatiniX 2 FrancaisOnboard IDE Key FeaturesSystem memory Form factorOnboard I/O Advanced featuresAGP Interface Main Expansion Slots and Connectors Green functionThis page is intentionally left blank PS/2 Keyboard/Mouse Connector External ConnectorsParallel Port, Serial Port Connectors UART1, UART2 ATX12V Power Supply Connectors & Power Switch Power SW Speaker Connector Speaker Hard Disk LED Connector HdledReset Switch Reset Power LED Connector PwrledSound Connector PC-PCI Infrared Header IrDAFan Connectors PWRFAN, CPUFAN, Chsfan Intruder Detect SwitchJINTRReservedWake-Up On LAN WOL Wake-Up On Internal Modem WOMPin SMBus ConnectorSMBUS Audio Connectors CDIN, MODEM, AuxinAvailable on PlatiniX 2-A/-AL, PlatiniX 2I-A/-AL Chassis Security Switch Chssec Communication and Networking Riser SlotCNRAudio InterfaceReserved Speaker SpeakerOutJumper Settings BIOS-ProtectEasy Jumper JAVOverclocking Jumper Setting JFS1optional JFS1 OpenCPU Core Voltage Setting JVID0~4optional Clear Cmos JCCJVID4 JVID3 JVID2 JVID1 JVID0 VcoreVEnable/Disable onboard audio JSD Enable keyboard password power-on function JKB This page is intentionally left blank Chapter Bios Description Utility SupportStandard Cmos Features Setup Award Bios Description Entering SetupLoad Optimized Defaults Press Del to enter SetupCyls Large mode LBA Logical Block Addressing modeRemark Halt On VideoMemory CPU SpeedEasy Setup ItemOption DescriptionAdvanced Bios Features Setup OptionOS2 Advanced Chipset Features Setup 64/128MB Power Management Setup Option DescriptionStop Grant #FDD/COM/LPT PNP/PCI Configurations Setup Option Integrated PeripheralsDescription Askir SPP EPP ECP ECP+EPP PC Health Status 650C/1490F Password Setting Boot with Bios defaultsQDI Utility CD Driver InstallAccessory Browse CDQDI ManageEasy Norton AntiVirusLogoEasy SpeedEasy Quick Setup ProceduresCPU SpeedEasy Setup Menu QDI BootEasy QDI BootEasy Nota QDI BootEasy Operation Process Install RecoveryEasy for the first timeIntroduction Partition Interface seeSteps DisabledSystem quits Limitation None FunctionF12 Recovery Interface see Backup PARSteps After pressing this button, turn on/off the switch FAT32 after entering OSDoes RecoveryEasy occupy the system resources? Ctrl+Bksp Switches to Partition User InterfaceWhat does RecoveryEasy do? OthersAppendix What if users lose the password? What is multi-boot?Does RecoveryEasy protect hard disk against CIH? Installation InstructionsPage Installation de la carte mè re PlatiniX Installation du systè meRecoveryEasy QDI ManageEasyQDI BootEasy Le menu SpeedEasyAppendix AGP Form Factor ATXChipset Intel OptionalMotherboard Layout Page Page Item Checklist