Quantum PlatiniX 2 Hard Disk LED Connector Hdled, Reset Switch Reset, Speaker Connector Speaker

Page 11

Chapter 2

Hard Disk LED Connector (HD_LED)

The connector connects to the case’s IDE indicator LED indicating the activity status of IDE hard disk. The connector has an orientation. If one way doesn’t work, try the other way.

Reset Switch (RESET)

The connector connects to the case’s reset switch. Press the switch once, the system resets.

Speaker Connector (SPEAKER)

The connector can be connected to the speaker on the case.

Power LED Connector (PWR_LED)

When the system is in power up status, the LED is on. When the system is in suspend status, the LED is blink. When the system is in suspend to RAM, the LED is off. When the system is in soft-off status, the LED is off. The connector has an orientation.

GREEN LED Connector (GREEN_LED)

When the system is in power up, ACPI suspend or soft-off status, the LED is off. When the system is in suspend to RAM status, the LED is on.

ACPI LED Connector (ACPI_LED)

The ACPI LED is a dual-color light with three pins. Pin1and Pin2 drive different color lights. If Pin1 drives the orange light , then, Pin2 drives the green light, the following status will come out. When the system is in power up status, the LED is green on. When the system is in suspend status, the LED is green blink. When the system is in Suspend to RAM status, the LED is orange on. When the system is in soft-off status, the LED is off.

Hardware Green Connector (SLEEP SW)

Push once the switch connected to this header, the system enters suspend mode.

Key Lock Connector (KEYLK)

The connector can be connected to the keyboard lock switch on the case for locking the keyboard.

 

 

HD_LED

 

HDD LED(+)

HDD LED(-)

 

 

ACPILED

SPEAKER

ACPILED

 

 

POWER

ORANGE(-)

VCC

SPEAKERRESET

SW

POWER

RESET

SW

GREEN(-)

GND

 

 

 

 

 

 

 

 

 

 

 

LED+

NC

 

 

 

 

 

 

POWER

SPKDATA

 

 

 

 

 

 

GND

RESET

 

 

 

 

 

 

EMPTY

GND

 

 

 

GREENLED

 

 

EMPTY

EMPTY

 

SW

SLEEPPWRLED

SW

SLEEP

LED+

LED-

GREENKEYLKLED

KEYLK

PWRLED

LED-

KEYLOCK

 

 

 

 

 

SLEEP

LED+

 

 

 

 

 

 

GND

LED-

 

 

 

 

 

 

LED-

GND

 

Manual for PlatiniX 2 series

Image 11
Contents Declaration of Conformity Manufacturer Quantum Designs HK Inc Contents PlatiniX 2 Francais Bios DescriptionQDI Driver CD ManageEasy BIOS-ProtectEasy Norton AntiVirus AppendixForm factor Key FeaturesSystem memory Onboard IDEAGP Interface Advanced featuresOnboard I/O Green function Main Expansion Slots and ConnectorsThis page is intentionally left blank Parallel Port, Serial Port Connectors UART1, UART2 External ConnectorsPS/2 Keyboard/Mouse Connector ATX12V Power Supply Connectors & Power Switch Power SW Power LED Connector Pwrled Hard Disk LED Connector HdledReset Switch Reset Speaker Connector SpeakerInfrared Header IrDA Sound Connector PC-PCIIntruder Detect SwitchJINTRReserved Fan Connectors PWRFAN, CPUFAN, ChsfanWake-Up On Internal Modem WOM Wake-Up On LAN WOLAvailable on PlatiniX 2-A/-AL, PlatiniX 2I-A/-AL Audio Connectors CDIN, MODEM, AuxinPin SMBus ConnectorSMBUS Communication and Networking Riser SlotCNR Chassis Security Switch ChssecSpeaker SpeakerOut Audio InterfaceReservedBIOS-ProtectEasy Jumper JAV Jumper SettingsJFS1 Open Overclocking Jumper Setting JFS1optionalClear Cmos JCC CPU Core Voltage Setting JVID0~4optionalVcoreV JVID4 JVID3 JVID2 JVID1 JVID0Enable/Disable onboard audio JSD Enable keyboard password power-on function JKB This page is intentionally left blank Utility Support Chapter Bios DescriptionPress Del to enter Setup Award Bios Description Entering SetupLoad Optimized Defaults Standard Cmos Features SetupCyls Remark LBA Logical Block Addressing modeLarge mode Memory VideoHalt On ItemOption Description CPU SpeedEasy SetupOption Advanced Bios Features SetupOS2 Advanced Chipset Features Setup 64/128MB Option Description Power Management SetupStop Grant #FDD/COM/LPT PNP/PCI Configurations Setup Description Integrated PeripheralsOption Askir SPP EPP ECP ECP+EPP PC Health Status 650C/1490F Boot with Bios defaults Password SettingBrowse CD Driver InstallAccessory QDI Utility CDNorton AntiVirus QDI ManageEasyLogoEasy Procedures SpeedEasy Quick SetupCPU SpeedEasy Setup Menu QDI BootEasy QDI BootEasy Nota QDI BootEasy Partition Interface see Install RecoveryEasy for the first timeIntroduction Operation ProcessSystem quits DisabledSteps F12 FunctionLimitation None Backup PAR Recovery Interface seeFAT32 after entering OS Steps After pressing this button, turn on/off the switchOthers Ctrl+Bksp Switches to Partition User InterfaceWhat does RecoveryEasy do? Does RecoveryEasy occupy the system resources?Appendix Does RecoveryEasy protect hard disk against CIH? What is multi-boot?What if users lose the password? Instructions InstallationPage Installation du systè me Installation de la carte mè re PlatiniXQDI ManageEasy RecoveryEasyLe menu SpeedEasy QDI BootEasyAppendix Optional Form Factor ATXChipset Intel AGPMotherboard Layout Page Page Item Checklist